Quote:
Originally Posted by Iceberg  That seems to be the 3rd "requirement" when you get a azbox
1. open cover and make sure all connections are tight
2. plug in receiver
3. update software  | Hi Iceberg, I did not remove the cover but I did have trouble plugging it in. It came with a little adaptor for the power cord. When I plugged it in with the adaptor I got nothing and started to think the receiver might be DOA but I remember others posting about power cord issues so I looked around the house and found another power cord from my digital camera that had the same end connector for the receiver but it had the normal outlet connector that we use here in the US on the other end. That got it going. Whew!
I took the power cord adaptor to work this morning and checked it with my volt meter and found it was defective. It would pass AC if the power cord was not fully seated but not if you pushed it all the way.
Later, DC
__________________
Dish HD ViP222, OTA SR-15, FTA - two fixed Ku dishes. One Fortec 80CM with Invacom QPH-31 on 30W. One Winegard 76 CM with KUL1 on 103W. One Fortec 80 CM with motor for feed hunting on arc from 58 to 105W. Pansat 3500SD, Mercury II, AZBox Elite. C-band 10 foot mesh dish with Chaparral feedhorn. On the arc from 55.5W to 121W.
|