I also have the Motorola 6412 with a CyberHome 1600 DVD recorder. I cannot get a picture to the DVD recorder. When I disconnect the Firewire cable, I get the error "no signal' on the monitor. When I connect the cable, the error message goes away, but the screen is still blank.

I have checked the d11 interface status in the diagnostics mode on the Motorola, and the 1394 I/O device has Active Ports = 1, and the 5C implementation = 0. I have tried both firewire outputs on the Motorola.

I have downloaded and installed the latest firmware on the DVD recorder. I am using the S-video output to a Sony 4x3 TV. I have rebooted both Motorola and CyberHome.

Any help would be appreciated.

Thanks
Ron