Im running a motorized dish and seem to be on the Clark belt pretty well. It seems im missing some transponders when I scan, some that I think should be there, many do work but i've noticed some compared to Lyngsat info maybe 1 digit off, like 113223 instead of Lyngsat's 113222. Im not at my setup so I cant give more details right now im just wondering if that likely an lnb issue or just dish aiming issue...
Thanks for all the help folks,
Traken

...many do work but i've noticed some compared to Lyngsat info maybe 1 digit off, like 113223 instead of Lyngsat's 113222.
That's normal.

when you blind scan the frequency may be off by + or - 2 and thats fine. Its when you're off by 10 or so that you'll have issues ;)

Ok, thanks guys, my little brain was getting all messed up trying to get that cleared up, hehe, i think my motor and my wife were getting tired of it too... ;)