View Full Version : HD stutters
andy_horton
09-24-2011, 08:28 PM
About once or twice a week or so, I can be watching an HD channel, and it will "stutter" or freeze for a half second or a second and then return to normal. I can do a soft or hard reset on it and it will work fine for a little while and then happen again. Does anyone else have this problem? I have a 722k. By the way...SD channels don't do this. Not sure why.
TheKrell
09-24-2011, 08:30 PM
HD channels usually come off a different sat than SD channels. When it's doing this, just for grins, hit menu 6-1-1 and tell us which sat and transponder that you're tuned to, and read off the signal strength.
andy_horton
09-24-2011, 08:36 PM
channel 105 sat 110 tr # 07, 57 signal strngth. green bar. That is one
andy_horton
09-24-2011, 08:46 PM
Also channel 184, sat 129, tr # 19, signal strength is 56 green bar
TheKrell
09-24-2011, 08:50 PM
High 50's is good. You'll lose lock below about 12 or 13. So, this is obviously not a signal strength (or dish aiming) problem. Are you saying that you've seen the stutter at these signal strengths?
andy_horton
09-24-2011, 08:53 PM
As soon as it happens I clicked on the 6-1-1 and that's what it read. Could be changing faster than I am, however!
TheKrell
09-24-2011, 08:57 PM
Well, you can leave up the Point Dish screen for several minutes, and watch to see if the SS varies. Frankly I think the problem lies elsewhere. Disk going bad? Noisy power? Don't know! For the record, I have a 722 (not k) and two 612s, and none of them exhibit this problem unless one h(*& of a thunderstorm is passing through the LOS.
Jimmerinwi
09-24-2011, 09:01 PM
Mid 50's on 110 isn't that good. It'll work, but in my opinion your signals are low. My educated guess (if that's worth anything, which it isn't) would be your dish needs to be retuned. It could be another sat or transponder is on the brink of losing signal and it causes you receiver to stutter and freeze.
Sent from my iPhone using SatelliteGuys
andy_horton
09-24-2011, 09:10 PM
Thanks ya'll! I have had a problem with noisy power in the past and had the outlet grounded and put a UPS on it. I'll keep checking my signal strength. Thanks again!
THANKS FOR VISITING!
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by
vBSEO