New to forum. How to find out who is online from DIRT Team to pm with.

Welcome to satelliteguys! At the bottom of. The forums page you will see who's online, the dish teams names will be in red.

http://www.satelliteguys.us/forum.php Yep, look at bottom of this page.

New to forum. How to find out who is online from DIRT Team to pm with.

I'm on now, so if there's anything that I can do for you, please let me know

Matt, how many cables should runs from 1K4 antenna to dual box for two XiP813 ?

It takes the required amount..........

The DIRT members are invaluable here. Do note though that there are some things that they just cannot do or have control over.

Matt, how many cables should runs from 1K4 antenna to dual box for two XiP813 ?

According to the wiring diagram printed on top, 3.

According to the wiring diagram printed on top, 3.

If you seen the picture http://www.satelliteguys.us/attachment.php?attachmentid=64889&d=1304659604, then you perhaps noticed a diagram in a middle with TWO lines to a dish.
I would rather to hear from DIRT member a correct info.

If you seen the picture http://www.satelliteguys.us/attachment.php?attachmentid=64889&d=1304659604, then you perhaps noticed a diagram in a middle with TWO lines to a dish.
I would rather to hear from DIRT member a correct info.

I will let you know when I find out

If you seen the picture http://www.satelliteguys.us/attachment.php?attachmentid=64889&d=1304659604, then you perhaps noticed a diagram in a middle with TWO lines to a dish.
I would rather to hear from DIRT member a correct info.
But if you would have looked here http://www.satelliteguys.us/attachment.php?attachmentid=64892&d=1304659665you could see that the diagram is the same. and the arrows on the left side of your pic say to ODU and points to 3 ports whereas on the solo node they only point to two.

The reason I am posting this is because you seemed to come across as an a$$. IMO that is. if you are going to try to prove someone wrong then maybe you should look and be sure you are correct. With my argument i have thus proven they probably used the same picture for the two nodes. just added more to the outside to label the ports. The diagram seems to just allow the installer to get his bearing when mounting the device. And i'm sure a dirt agent will be able to get the info. they know who to ask but for a product that hasnt released yet and only in houses of a few beta testers i'm pretty sure they are either not going to be able to get a straight answer or it will be same as mine and thekrell

If you seen the picture http://www.satelliteguys.us/attachment.php?attachmentid=64889&d=1304659604, then you perhaps noticed a diagram in a middle with TWO lines to a dish.

That's a cartoon. Look at the 3 inputs and compare to the 2 antenna inputs on the solo node: http://www.satelliteguys.us/attachment.php?attachmentid=64892&d=1304659665

Edited to add, "Ha! I see csmith beat me to it (on the next page of this thread). Thanks".

Matt, how many cables should runs from 1K4 antenna to dual box for two XiP813 ?

Thought it was two with MoCA technology being the first play at running dual signal through a single cable. ...The chart was confusing as hell though. Especially since they kept changing it.