How to use DAPT for pointing HN7000

[elcuraalvarez]

Dear friend

I have a Hughesnet HN 9000 activated but I have go to live for a while to cuba it is pocible to capture the sign from The Havana Cuba, for example: I can desarmer the hughesnet and to take it to cuba and to install it myself, Because there are not installers of Hughesnet in cuba. Please Help me . write me to : elcuraalvarez@yahoo.es

[jbuendia]

Still no luck and now to add to my list is the fine elevation alignment tool.

If anyone has any information where I can get these two items...........................Please let me know.

It's killing my install times trying to peak these Ku systems in!!!

[HCI]

Still no luck and now to add to my list is the fine elevation alignment tool.

If anyone has any information where I can get these two items...........................Please let me know.

It's killing my install times trying to peak these Ku systems in!!!

here is something you can try, i heard this would work but have never tried it. take a splitter and put it in the place of the 22k block. in to the dapt and out to the lnb.

[grohgreg]

...and now to add to my list is the fine elevation alignment tool.

I saw one on eBay recently, and you can get them here too:
Search Results - DiRECWAY / HughesNET Tripod for Satellite Internet, Take it Anywhere

Not sure why the 22KHz filter is actually used, considering that 22 KHz is turned off in the modem interface. Mine is semi-permanently strapped to the OPI-C, but I just assumed that it was passive. Or does yours not work at all without the filter inline?

//greg//

[jbuendia]

I found a program that runs on your laptop and works in conjunction with the modem. You do not have to open a browser window nor do you have to enable the opi in setup.

Just interface with the modem and run the program. You can point and do manual and automatic cross-pols.

I'm not sure how to upload this so if someone can tell me how I'll post it.

Thanks to every1 that has posted here and tried to help me obtain these items.

I finally got a pair of filters and am gonna try it out tomorrow on a Ku.

Thanks for the link for the eltool. Kinda expensive. Before P10 discontinued it it was $24.95.

If anyone else knows where I can pick one up cheaper please let me know.

Thanks to all,
Jamison

[HCI]

I found a program that runs on your laptop and works in conjunction with the modem. You do not have to open a browser window nor do you have to enable the opi in setup.

Just interface with the modem and run the program. You can point and do manual and automatic cross-pols.

I'm not sure how to upload this so if someone can tell me how I'll post it.

Thanks to every1 that has posted here and tried to help me obtain these items.

I finally got a pair of filters and am gonna try it out tomorrow on a Ku.

Thanks for the link for the eltool. Kinda expensive. Before P10 discontinued it it was $24.95.

If anyone else knows where I can pick one up cheaper please let me know.

Thanks to all,
Jamison

did you get the program off a website?

[jbuendia]

Yes, I found it on datastormusers.com under the articles tab.