Results 1 to 4 of 4
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 02-28-2009 03:41 PM #1
- Join Date
- Jan 21st, 2009
- Location
- At the NASA uplink center in Nebraska.
- Posts
- 854
Will a 100 K Nise floor LNB work with digital receivers?
ADVERTS 1
I have two older LNB's
First one is a MACOM Ga As FET Model MC2016-3-1
the second one is an Avantek AWC-42120
Can I use any of these with the Pansat 9200 HD on C Band?
The noise temp is listed at 100 K for each.
It also looks like they have an N connector on it instead of an F connector. (Which isn't a problem for me because I have every known style of adapter.)
OR
Are these nothing more then glorifed junk?
- 02-28-2009 03:41 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 02-28-2009 04:48 PM #2
The No Pain Train
- Join Date
- Nov 17th, 2003
- Location
- Now Living In the Last House on the Left
- Posts
- 75,786
Proud Staff Memberthey might work....temperature is pretty high (I have a few old 35K and 25K ones) but you can try it
They only get one polarity at a time and would have to switch polarity with a analog receiver (or a screwdriver) Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 02-28-2009 05:30 PM #3
SatelliteGuys Guru
- Join Date
- Dec 26th, 2006
- Location
- Oneonta,AL
- Posts
- 7,291
lnas
ikki those are old type lna, made to be used with a sep little box (downconverter) that was mounted close to the lna. They had those weird connectors and huge cable between them. They might work if you had the DC to go with them but wouldn't be the best to use these days.
Icon 550, Vantage 1100HD (thanks Stogie) on .90M primestar DG380 motor.10'Sami+GI650 for c-band.
CS5000 now on 1m primestar-polar mount backup system.
Avatar: Kepler20E, artist's conception, see NASA's Kepler Mission page:http://www.nasa.gov/mission_pages/ke...20-system.html
- 02-28-2009 06:24 PM #4
- Join Date
- Jan 21st, 2009
- Location
- At the NASA uplink center in Nebraska.
- Posts
- 854 Thread Starter
Thanks for the info.
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks