Results 1 to 10 of 14
- 04-03-2010 04:57 PM #1
C Band system in local swap sheet - fair price?
ADVERTS 1
Just found this lisitng - does this sound like a fair price? Also - would this be a decent starter c band system? I know very little about c band
THANKS!
Satellite System;
10ft wire mesh dish, electric dish mover with cover, GI S350i receiver, decoder module, LNB, feed horn with cover, $150.
- 04-03-2010 04:57 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 04-03-2010 06:46 PM #2
A little high to me.
I'd at least go take a look to see if the LNB is actually a Quality Chaparral style dual Feed Horn with quality C and Ku LNBs.10' Unimesh w/ DMX741, GBox 3000, AZBox Elite, SatHawk PVR800 with Motorized Prime Focus 36" Backup.
Diamond 9000, Motorized 80cm BJU Dish.
- 04-03-2010 06:57 PM #3
- Join Date
- Feb 10th, 2006
- Location
- Waterloo, Iowa
- Posts
- 4,375 Thread Starter
Thanks for the info - I have no idea what these should run in price. Not sure where I would put it though
- 04-03-2010 07:08 PM #4
one lizards opinion:
As an impulse item, I'd think, "no".
If you're really interested in C-band, read the C-band department.
Look at the dishes people have found (many for free), and get an idea what type and size you'd like.
(and find out what size you need)
If you don't mind taking one down and hauling it home, ...digging up their pole, ...and maybe knocking the concrete off it, ...then you could get at least that good a system for free.
See my signature: AMCI 8' perf & AJAK-180 )
Spending money does not guarantee a better system.
Careful shopping, and luck, does! -
There are lots of hidden costs in a C-band setup, so save your money for a good post hole digger.
I got one with a compound clam on the business end; maybe $40 on sale.
You'll need lots of bags of cement.
Ya may use an analog STB as a mover to start, but you'll soon want a Gbox v3000 from Sadoun, to use with your DVB receiver.
And the co-rotor that's on it will eventually give way to a C2, or a nice little ortho.
Not to mention the obligatory AZbox or equivalent! -
So, save that $150; you'll need it soon! -
- 04-03-2010 09:12 PM #5
- Join Date
- Feb 10th, 2006
- Location
- Waterloo, Iowa
- Posts
- 4,375 Thread Starter
THANKS for the info! I think I will pass on this outfit. I really do not have a place for it anyway
- 04-03-2010 09:12 PM #6
you can find room for a C-Band dish somewhere
Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 04-03-2010 09:45 PM #7
- Join Date
- Feb 10th, 2006
- Location
- Waterloo, Iowa
- Posts
- 4,375 Thread Starter
I probably could...but.....it would be very visible
- 04-03-2010 10:13 PM #8Raydx 10.5': Dual C ( H2H Programming ) (1) DSR-920: (2) DSR-920: (3) DSR-920
Raydx 8.5': Mover DSR-920: DMX242, Traxis DBS3800, Pansat 2700A
Unimesh 7.5': BSC421, Mover GI 450i, Pansat3500, GeoSat100c
Channel Master 7.5': Mover GI 350i: DMX241, DSR-R100b, Openbox S10, CS5000, MRX-1200
Channel Master 8': BSC421, Openbox S10: New Receivers: Traxis DBS2800 X 3ea.
Prodelin 1.2M: Dual KU: Prodelin 1.2M:
OTA: Tower 35', Ham II Rotor: (UHF) CM4251 & CM7775, (VHF) CM3617B & CM7776
Blonder Tongue MUVB-56 Distribution Amp: Channel Plus Modulators Qty 9 : FS1 Meter
Dish Network 322/ Family Package: Prodelin 1.2M
- 04-04-2010 04:11 AM #9
C-band system for $150 man that is a very good price.
- 04-04-2010 10:37 AM #10
Take your time iafirebuff , this is the perfect time of year to find a free setup or very low priced sysytem. I think $150.00 is a bit high , as Anole said you will most likely run into other cost . I myself have aquired 2 bud systems for 0$ . Most people just want them out of there yard especially at this time of year with spring cleanning . And as where to put a bud , where theres a will theres a way ;} Good luck on your hunt .
2-Pansat 3500, 1 Icon 550, 1 Fortec ,1 AZ Box elite, 1 Azbox Premium Plus
QPH-031 ,3 DMX741
Fortec Star 31",,Unimesh 7.5',, 8' Perfect 10,, 10' Prodelin
DG-380 Motor,, positioners Von Weise ,,Vantage ,, Thompson Saginaw,, 3 GBOX V3000

LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks