Results 1 to 10 of 17
Thread: IPG
- 08-27-2010 06:28 PM #1
IPG
ADVERTS 1
Anyone know why the IPG is asking me which satellite to get the guide from? DSR922.
Azbox Elite and Ultra, 4DTV DSR922/HDD-200 (non-bricked 4160 EMM), Paraclipse-12 with C2, KTI CKD-12 w/DMX741, WS9036/DMX521/SG9120, Sony Bravia 46", Sony BluRay models BDP-S360 and BDP-S570, Onkyo 6.1 Amplifier, too many remote controls.
- 08-27-2010 06:28 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 08-27-2010 06:41 PM #2
I get the same prompting message when the guide needs updating too. I sub thru Skyvision & some of the channels are on W5. My guess would be that either W5 or G1 are used for this depending on the package you are subbed to. My DSR922 gets hits on either of these sats.
7.5ft Perfect10 w Venture ballscrew actuator & DMX322 LNBF, 36inch WSI w DG380 mtr & DMX522 LNBF, both dishes on Eagle Aspen powered 4x8 multiswitch.
DSR922s, 905, H2H sub w/SRL FTA: Pansat 3500, 9500HDX, Coolsat 5000, Ferguson Ariva 100, Azbox elite & Premium+
- 08-28-2010 11:39 AM #3
- Join Date
- Aug 2nd, 2009
- Location
- 42N 103W
- Posts
- 1,187 Thread Starter
Azbox Elite and Ultra, 4DTV DSR922/HDD-200 (non-bricked 4160 EMM), Paraclipse-12 with C2, KTI CKD-12 w/DMX741, WS9036/DMX521/SG9120, Sony Bravia 46", Sony BluRay models BDP-S360 and BDP-S570, Onkyo 6.1 Amplifier, too many remote controls.
- 08-28-2010 03:10 PM #4
SatelliteGuys Regular
- Join Date
- Jan 12th, 2010
- Location
- Midway, Utah
- Posts
- 338
- 08-28-2010 08:31 PM #5
SatelliteGuys Guru
- Join Date
- Mar 9th, 2007
- Posts
- 6,872
- 08-28-2010 09:37 PM #6
Just for the heck of it I left my DSR922 on W5, TVGame ch 440, for a few hours today, powered off. It got hits alright but not guide updates. When the info button is pressed on the remote it still prompts that guide information is available on G1.
I seem to recall that G1-3, 150 & 167 are all valid for hits. I've left mine on ch 150 & the guide seemed to stay current while the ird was off.
The ALTV test bars are still there on W5 BTW.7.5ft Perfect10 w Venture ballscrew actuator & DMX322 LNBF, 36inch WSI w DG380 mtr & DMX522 LNBF, both dishes on Eagle Aspen powered 4x8 multiswitch.
DSR922s, 905, H2H sub w/SRL FTA: Pansat 3500, 9500HDX, Coolsat 5000, Ferguson Ariva 100, Azbox elite & Premium+
- 08-30-2010 11:42 AM #7
My 922 is subbed to W5 on a fixed dish and gets it's hits and remaps there just fine for a few years now. The guide data in minimal showing only the title of the current program airing without any details.
- 08-30-2010 03:19 PM #8
SatelliteGuys Guru
- Join Date
- Mar 9th, 2007
- Posts
- 6,872
- 08-30-2010 05:25 PM #9
SatelliteGuys Regular
- Join Date
- Jan 12th, 2010
- Location
- Midway, Utah
- Posts
- 338
BUT it is getting guide info from that sat?!
Well that is somthing new to me.
Terry
- 08-30-2010 06:12 PM #10
SatelliteGuys Guru
- Join Date
- Mar 9th, 2007
- Posts
- 6,872
If you let your guide info run out and go to W5 it always got what show is on. I have seen this for years.
Talking about the guide I have noticed that there is very little info coming from G1-3 now. I wonder if Motorola isn't experimenting with a trickle down stream that they will use on W5 for us after 12/31. Anybody else notice very little guide data when we update on G1-3?

LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks