Thread: c-band and fta

Hello to all,
I have a motorized 16 foot k-u band mesh dish with dual c band lnbs with a 4dtv box. I have just purchased a viewsat 5000 platinum. I have spent today playing at tunning in the viewsat hooked to one of the c band lnbs with some success. 250 channels across many satellites. Hopefully to-morrow I will collect a new feedhorn, adl, that is supposed to enable both systems, c band and fta (dish network).

BUT I have a few questions that I hope can be answered.

My viewsat says main s/w 1.27 and loader 0.06. Having checked the viewsat website and the forums these numbers don't seem to relate to what is available. I have downloaded the latest from viewsat but I cannot tell if they are newer because the numbers are so different.

As for the feedhorn and lnb, what should I be using ? Should I have a c band lnb with polalizer and a ku lnb or do I need some sort of "special" lnb/feedhorn combination to enable both systems to work ?

Do I need one of these desqui switches to make it all work ?

The internet is a wonderfull source of information but at the moment I am only finding information that is beyond me as a newbie to fta. I have a pretty good understanding of c-band.

One last question. Is there a list available that will show me what satellites and channels I can hope to recieve ?

regards to all Dave

This is how I'm going to do mine:


http://www.dmsiusa.com/add_a_receiver.htm

I picked up the HF Splitters from Sadoun and you likely got a DiSEqC switch with your Viewsat.

You'll control the polarity with your 4DTV.

Skyvision has a PDF that is a good start for what's up there on FTA:


http://skyvision.com/pages/informati...annelguide.pdf




I'm not sure what's going on with your software versions, but it's always safe to go with the OEM firmware.

Originally Posted by rallycrawford

Hopefully to-morrow I will collect a new feedhorn, adl, that is supposed to enable both systems, c band and fta (dish network).

Hello,
Dish Network is NOT FTA. While we are a nice bunch of folks here at satellite guys, HACK TALK IS NOT ALLOWED. Will a mod please take a look at this post?

Originally Posted by drhydro

Hello,
Dish Network is NOT FTA. While we are a nice bunch of folks here at satellite guys, HACK TALK IS NOT ALLOWED. Will a mod please take a look at this post?

Hey Doc,

I don't see anything in his post that is obviously hack talk. There is FTA on Dish network, not a lot, but channels like NASA and GolTV are favorites of a lot of FTA'ers. Iceberg keeps a sticky on the FTA/MPEG2 FAQ forum of channels that can be legally received.

http://www.satelliteguys.us/fta-mpeg2-faqs/34131-what-can-i-get-18-dish.html

Mike

Guess i read it wrong, sure looked like he was looking to get all the dn stuff, esp. after he mentioned he read on the web that he had the wrong software on his new viewsat STB. If not, my apologies.

Originally Posted by drhydro

Hello,
Dish Network is NOT FTA. While we are a nice bunch of folks here at satellite guys, HACK TALK IS NOT ALLOWED. Will a mod please take a look at this post?

What hack talk?????