Thread: Nimiq 4 strength

As of now, all odd transponders, except 3, are on Nimiq 4 at 82°.
I have all 100 for them here.
Wonder what strength you have in the south.

Over night I have lost all odd TP on 82 with the exception of TP3 that is coming in at 82%. All other 0%.

Did a check switch and it come back with 91 ALL and 82 EVEN.

This is the trouble shooting I have done

changed the 91 and 82 cables around on my switches, did a check switch still the same ALL on 91 only EVEN on 82, switches seem fine

then switched LNB's on my dishes (2 dishes 1 for 91 and 1 for 82) did a check switch and still the same ALL on 91 and only EVEN on 82. So I ruled out that the switches are bad and the lnbs are bad.

By passed the switch on one of the recveivers, replaced the cable and still only EVEN TP are showing up with the exception TP3. WTF is going on.

Did memory dumps, check switches without cables, with cables, unplugged, plugged, seems to want to download the guide many times.

What confuses me is that there were there last night and gone today. Call CSR did a rehit nothing.

And why are only the EVEN TP showing up on a check switch but in viewing the strengths TP 3 is the only one of the odd that has %.

All the EVEN TP are around 87% and that lone baby TP3 is at 82% locked.

No overnight wind to move the dish.

So some brainstorming, what do you think is the problem? Both receivers are doing the same thing!!!

I am done scratching my head now!

For us down South we have nothing!!!

At this moment I have TP1 at 89, TP3 at 90, all the rest of the odd TP's are zero. All even TPs are in the 80's. I am in the south.

Well it seem the new Nimiq 4 coverage will be strictly Canada.

ARE THE ODD'S SHOWING UP WHEN YOU DO A CHECK SWITCH? THIS DOESN'T LOOK VERY GOOD FOR US RIGHT NOW!!!

Like all the previous reports, with the exception of TP3, I have lost all odd transponders on 82.

Well you were breaking the Customer Service agreement with Bell by receiving Signals outside of Canada so I guess now you should get hold of Dish or Direct and stop breaking the rules.

Motored the 90cm over to 82 and the same thing in my neck of the woods...no signal.

Originally Posted by OnlineLC

Like all the previous reports, with the exception of TP3, I have lost all odd transponders on 82.

+1