Results 1 to 4 of 4
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 02-08-2012 08:33 AM #1
SatelliteGuys Newbie
- Join Date
- Feb 8th, 2012
- Location
- canada
- Posts
- 1
Connect two 9241's with an sw44 switch
ADVERTS 1
Sorry but been looking for an answer for days now....I hope I'm in the right place....
I have now a 2 dual lnb's and an sw44 switch (all 4 cables are connected). 1 and 2 are connected to my first 9241. I just got another 9241 and connected 3 and 4. however, I can't get the reciever to get both satellites? What is the correct cable connections and will the sw44 work for this setup?
BCLast edited by bcondemi; 02-08-2012 at 08:51 AM.
- 02-08-2012 08:33 AM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 02-08-2012 09:17 PM #2
SatelliteGuys Regular
- Join Date
- Apr 15th, 2007
- Posts
- 218
Nothing wrong with the way it is wired but I would check the connectors and the cable to the 2nd 9241. Don't forget to run a check switch. Look for old cable splitters on the cables too.
- 02-09-2012 01:23 PM #3
SatelliteGuys Regular
- Join Date
- Nov 9th, 2009
- Location
- canada
- Posts
- 715
that should work, do you have the power inserter connected to port one?
sounds like a bad cable or connector/cable endLast edited by Mikey11; 02-09-2012 at 04:12 PM.
- 02-09-2012 01:47 PM #4
SatelliteGuys Regular
- Join Date
- Oct 27th, 2008
- Posts
- 649
Do you have both cables from either 82W or 91W going to 1a & 1b and the other satellite position on 2a & 2b? You cannot cross over the satellite positions between 1 & 2 on the input side.
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks