Results 1 to 5 of 5
Thread: H20-100 CE Release 0x4090 7/18
- 07-18-2008 03:19 PM #1
H20-100 CE Release 0x4090 7/18
ADVERTS 1
Systems in CE:12:01 (0x4090)
H20-100
Window of opportunity to download:
Friday, July 18, 2008 11:00PM - 2:30AM ET
Saturday, July 19, 2008 11:00PM - 2:30AM ET
Improved
01 - UI Polishing
01 - Improved Stability
01 - Added game Lounge Robustness
- 07-18-2008 03:19 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 07-18-2008 10:41 PM #2
- Join Date
- Apr 3rd, 2005
- Location
- Centeral Michigan
- Posts
- 8,471 Thread Starter
Proud Staff MemberWell, I downlaoded it. I don't use this receiver much, but we'll give it a spin with the HR seris being off this week
- 07-19-2008 07:07 AM #3
I did too, once again, I don't use this one for any more than my late night bedroom TV, don't notice too much difference, so it must be under the hood stuff they worked on ...
JimboLet the Urban Era Begin !!!
2 HR24-500's, 2 HR24-100's, SL3 Dish, SWM Dish, 60" Pioneer Elite, 2 - 42" Pioneer Elite's, Seagate 1.5 TB EHD
- 07-21-2008 01:31 PM #4
- Join Date
- Apr 3rd, 2005
- Location
- Centeral Michigan
- Posts
- 8,471 Thread Starter
Proud Staff MemberLast night I was watching some MLB games on the H20-100.
Out of 4 channels I tried - 3 of them did not go where they should have.
I got a couple that ween to PPV stations, one showing buy for $4.99, and one showing the showing had expired, i.e. too far into the movie.
Another channel went to a different game.
All three of my HR20's tuned the games fine, it was isolated to this receiver.
A red button reboot cleared the issue.
- 07-23-2008 09:16 AM #5
- Join Date
- Apr 3rd, 2005
- Location
- Centeral Michigan
- Posts
- 8,471 Thread Starter
Proud Staff MemberLast night I left the receiver on one of the MLB EI stations (that go black after the game) and shut it off.
This morning I could get signal / stations on the basic 3 sats, 101/110/119. Any of the new sats 103/99 were all zeros and no new HD stations came in.
A reboot and still show zero signal on 99 and 103. The channels do now show programming though, despite showing zero signal.
I re-ran satellite setup, still same thing afterward.
FYI I'm using a SWM LNB and it works fine on the 3 HR20s, just have the problem on the H20-100.

LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks