Results 1 to 4 of 4
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 07-11-2004 04:11 PM #1
SatelliteGuys Freshman
- Join Date
- Dec 11th, 2003
- Posts
- 9
Can't seem to get 119 satellite on Dish 500 ADVERTS 1
I am just trying to get Dish 500 to work with 311.
When I connect a RG6 to one of the connectors to the Dish500's TWIN LNB (BS1D1UP201M), I only get signal for 110. I can't seem to get 119. I tried the other connector on the LNB as well, but same results.
Basically, I can't get 119.. Is 311 compatible with Dish 500 Twin LNB?
Thanks in advance.
- 07-11-2004 04:11 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Posts
- Many
- 07-11-2004 05:06 PM #2
- Join Date
- Nov 25th, 2003
- Location
- Wichita Falls, Texas, United States
- Posts
- 847
- Gamer IDs
-
Did you use the 110 to tune the dish in the first place? You may need to do a check switch. The 311 should be compatiable.
- 07-11-2004 06:30 PM #3
- Join Date
- Feb 29th, 2004
- Location
- Florissant, CO
- Posts
- 5,688
What hugh said. Run Check Switch first.
Plus, are you sure you've got the 110 LNBF pointing at 110? Or maybe the 119 LNBF is hitting 110. To check, cover the 110 LNBF. If signal stays, your dish needs to be twisted 9 degrees to the west.
- 07-11-2004 09:45 PM #4
SatelliteGuys Freshman
- Join Date
- Dec 11th, 2003
- Posts
- 9 Thread Starter
Thanks.. I'll give that a try.
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks