Dish 622 L445 Release Notes

[Scott Greczkowski]

Fixes for reboot problems

Fix for permanent audio loss

Timer fixes

[darrencp22]

I wonder if this will fix the issue I was having with shows ending early.

[aperry]

More than likely the "shows ending early" is because the broadcasters sometimes run shows a minute or two long. Dish's guide DOES NOT take this into account.

An example of this is "Private Practice" which aired on Wednesday night. The official time for the show was 9:00-10:02 Eastern/Pacific. In our guide, however, it showed as ending at 10:00.

This overrun happens with many popular shows, like Lost, Desperate Housewives, Grey's Anatomy, etc. Happens with Heroes too, though the "official" schedule didn't seem to indicate the overrun even though the last 30 seconds of the show always airs during my Journeyman recording.

[BFG]

did this update remove the hd water mark from the antenna channels, or was that the last?

i didn't mind that antenna channels were not labeled as hd cause i never watched them, but now there are no hd markings for the antenna recordings in the dvr that really are hd

[pdxsam]

I don't remember the OTA channels ever having a watermark.

Would be nice if they did.

[HDinTX]

Apparently the 622 L445 update affected the scheduled recordings to my external DVDR/HDD Panasonic. With L445 the Panasonic doesn't get the "trigger" from the 622 to come on and begin recording at the scheduled time.

[Jim S.]

Apparently the 622 L445 update affected the scheduled recordings to my external DVDR/HDD Panasonic. With L445 the Panasonic doesn't get the "trigger" from the 622 to come on and begin recording at the scheduled time.

I never knew Dish provided the ability to control other devices. Where is that in the menu?

[HDinTX]

I never knew Dish provided the ability to control other devices. Where is that in the menu?

Menu, Preferences, Record Plus, ERD (External Recording Device)

[n0qcu]

Record to ERD is only for automated recordings to the POCKETDISH at this time.

[Jim S.]

That's what I always thought, but HDinTX claims otherwise. Did we miss something with a previous software version? I looked at the menu screen in question and it provides no explanation of itself at all, but surely if it was intended to control an analog recording device there would be somewhere to set up IR codes rather than just turn the feature on or off. But I never looked at it in previous versions, because I had always read it was just for the PocketDish.

[rant] Dish has this ridiculous inability to document their own software, or even provide sane user interface design. For example, not telling us what an External Recording Device is supposed to be. For another example, giving "air, cable, hrc, irc" options in the input setup screen, leading us to believe that they might have the ability to record analog or QAM channels when they don't. If this setting is for the RF output format, it should be in the output channel selection screen. If it's not, what's it doing in the software in the first place? [/rant]