Results 1 to 3 of 3
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 10-16-2007 09:32 AM #1
SatelliteGuys Freshman
- Join Date
- Sep 5th, 2004
- Posts
- 6
Can the 722 use legacy equipment for HD?
ADVERTS 1
Does Legacy technology work with a VIP 722 receiver? I have a Dish 500 pointed at 119 & 110 and a dedicated dish pointed at 61.5 and all LNB's are legacy. I'm currently running a (2) 721 and (1) 5000 receivers. The VIP 722 which I'm waiting for will replace the 5000. I'm using (6) 2 way splitters each with a power pass port and a DC blocked port, (2) sw64 switches and (3) Feed Through Loads to supply the signal to my receivers. The receivers recognize the switch matrix and see all 3 satellites with strong signals. Thanks for your feedback!
- 10-16-2007 09:32 AM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Posts
- Many
- 10-16-2007 09:34 AM #2
- Join Date
- Dec 13th, 2004
- Location
- San Francisco Bay Area
- Posts
- 10,206
As long as you have two feeds from the SW64 switch to the receiver, yes it should work.
- 10-16-2007 09:55 PM #3
SatelliteGuys Senior
- Join Date
- Nov 16th, 2005
- Location
- Utah
- Posts
- 856
Are you telling us or asking the question? The 722 will work with legacy LNBs but you must run 2 lines to the 722. Both lines need all 3 birds so you would need a SW64 switch. Lots of cable and lots of work.
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks