dish 510 dvr showing low signal

**all4jo** · 11-23-2009 09:36 AM

Hey guys, so i have a 722 and 510 . when i try to watch disney channel on the 510 i get no signal errors, and when i check signal on transponder 6 on the 722 i get 40-45 but when i check it on the 510 i get 7-10.
i would like to also say that i using a dpp44 switch. and where i have the 510 i used to have a 622 that just started having reboot problems. and it used to get good signal on that transponder.

**harshness** · 11-23-2009 09:56 AM

I'd try another port on the DPP44 (since you would appear to have two unused ports).

You could also try plugging in the 510 where the ViP722 is as a test.

The key is to establish whether the problem is with the receiver or something else.

**kb2vgp** · 11-23-2009 11:15 AM

What are the signal strengths on transponders 14, 15, 16 and 21 on both 119 and 110? You may need to repeak your dish or even replace some cable. A signal strength of 40-45 on the 722 is also low and should be up in the 70-80 range on transponder 6. Knowing the strengths of the other transponders and satellites can help to give a larger picture of what is going on.