Satellite guys Exclusive! Mad Scientist! 129 ON BOTH SUPERDISHES!

**SatinKzo** · 08-16-2005 11:08 PM

Well, that is odd cause my 921 had 129, then didn't, then I pointed the dish and 129 was back as an option on my 921. I wonder what I hit then with my sat finder... and why 129 came back on my 921. I don't have FTA setup, so what else is up there that I could have hit cause I definately had tone on my meter?

I never did get anything on any TP on 129 on my 921 but since the 129 option has been on/off all week on that thing I figured it was just a 921 issue.

**Smith, P.** · 08-16-2005 11:43 PM

Check my pictures at dbstalk, down on frequency you'll see signals from Ku FSS IA7 what Dish Ku DSS LNBF still receiving. But, you'll not able to lock any E*10 transponder - today in the DSS range [12.2-12.7 GHz] you can see only noise.

**SatinKzo** · 08-17-2005 08:15 AM

that must of been it then, but I still wonder why 129 re appeared on my 921 after getting the dish moved. Probably just another 921 bug.

That would also explain why my 301 never got 129 after changing the dish if indeed the sat appears after getting signal from 129

**BrettTRay** · 08-17-2005 10:06 PM

I was wondering what the hell happened. I had it the other day then went to try to hit it with a dish300 and couldn't get it. I thought I was losing my touch!!!

**Iceberg** · 08-18-2005 09:25 AM

its off right now

**Stargazer** · 12-06-2005 12:56 AM

Where do you connect the DP-21 switch to the DP-34 switch in this setup to get the fourth location?

**TheDishNetworkInstaller** · 12-06-2005 03:31 AM

I thought the original poster disconnected the FSS LNB and used a Dual on the other side?

The only way that I think you could use the SW21 to get 4 Sat's would be on the out port to one receiver only.

**SimpleSimon** · 12-06-2005 03:56 AM

Originally Posted by TheDishNetworkInstaller

I thought the original poster disconnected the FSS LNB and used a Dual on the other side?

The only way that I think you could use the SW21 to get 4 Sat's would be on the out port to one receiver only.

You're NOT going to get a SW-21 to work at all.

However, to answer Stargazer, the DP-21 input #1 goes to an output of the DP-34. DP-21 #2 goes to the wing, and the DP-21 output to the receiver.

**TheDishNetworkInstaller** · 12-06-2005 02:42 PM

Man I hate it when I use the wrong name Dish really needs to quit the simular name crap.

**SimpleSimon** · 12-06-2005 03:29 PM

Originally Posted by TheDishNetworkInstaller

Man I hate it when I use the wrong name Dish really needs to quit the simular name crap.

Actually, the naming standards are appropriate. "SW" is a Legacy switch, "DP" is a DishPro switch, and the digits indicate the number of inputs and outputs.