Results 71 to 80 of 150
- 06-01-2008 11:24 PM #71
ADVERTS
Clear skys today actually picture perfect. I thought that maybe they are in the process of moving G10 out and G18 in, time will tell. I have read other posts about 11720 but I never had an issue, I guess its my turn now.
- 06-01-2008 11:24 PM # ADS
Paying The Bills With Google Adsense Circuit advertisement- Join Date
- Always
- Posts
- Many
- 06-01-2008 11:51 PM #72
Barney, just north of you in Southern Ontario, and the signal is only 13-17% on the Pansat, it use to be around 45% but has been steadily falling the last week or so to be bouncing around the 30% mark. Today is hasn't been above 20%. All other transponders have been at their usual levels. I haven't done any attempts at tweaking, waiting until the swap before I consider doing that.
AZBox Ultra HD + Pansat 3500SD + EMP Centauri 8x1 (GOTO nn) + 4x1 DiSEqC + 22KHz switches
Fortec 80cm: Amazonas2 (61), AMC6 (72) / Ariza 80cm: G19 (97), AMC1 (103), Echo11 (110) / Fortec 80cm: Echo7 (119), AMC21 (125) / Ariza 80cm: G18 (123) / Star Choice 75e: Echo12 (61.5), H2 (74), AMC9 (83), SES2 (87), G25 (93) / SC 60e: AMC16 (85), G28 (89) / SC 60e: G11 (91), G3C (95), SES1 (101) / SC 60e: (107.3), (111.1) SC subscription dish (+ FTA)
Avatar: 2008 setup 61.5, 72 or 74 (selectable), 79, 87
- 06-02-2008 12:08 AM #73
About 4 months ago my quality went from 50 percent to 30 percent and stayed there. Today its 10 percent, I went to Hispasat and it came in fine as usual same as AMC5, G26 and AMC6 so I dont think my dish is out of line, weve had some strong winds but I dont think thats the issue
- 06-02-2008 12:52 AM #74
I have a note that in the middle of February I was out in the cold tweaking the dish after a prolonged loss of about 15%, and no, the only thing the very minor tweak did was may be lessen some of the fluctuation! The signal did improve a bit some time after that, but never back to the level I was getting prior to that.
AZBox Ultra HD + Pansat 3500SD + EMP Centauri 8x1 (GOTO nn) + 4x1 DiSEqC + 22KHz switches
Fortec 80cm: Amazonas2 (61), AMC6 (72) / Ariza 80cm: G19 (97), AMC1 (103), Echo11 (110) / Fortec 80cm: Echo7 (119), AMC21 (125) / Ariza 80cm: G18 (123) / Star Choice 75e: Echo12 (61.5), H2 (74), AMC9 (83), SES2 (87), G25 (93) / SC 60e: AMC16 (85), G28 (89) / SC 60e: G11 (91), G3C (95), SES1 (101) / SC 60e: (107.3), (111.1) SC subscription dish (+ FTA)
Avatar: 2008 setup 61.5, 72 or 74 (selectable), 79, 87
- 06-02-2008 06:37 AM #75
The East-West theory may be a workable one. I'm on the East Coast. 11720 on my Viewsat and Twinhan have been for the most part unwatchable for the last week with Q readings between 0 and 15%. 11800 have had qualities of between 60 and 90% depending on conditions locally and in Little Rock.
Winegard 1M on a Sadoun DG380 HH motor at 63.5W
Canadian Satellite Antenna Systems 10.5' BUD - 37.5 to 125W, dual-ortho Chaparral w/Norsat 8515s
AzBox Elite, Coolsat 5000, StarTrak 6 Analog, GBox 3000
Avcom PSA-45D Spectrum Analyzer
- 06-02-2008 08:04 AM #76
SatelliteGuys Guru
- Join Date
- Mar 9th, 2007
- Posts
- 6,871
It's been weaker here lately too. If G-10 is still the original they are probably doing everything to save the little bit of fuel left. I wish we had a confirmation that the new satellite was up and running. I've been getting itchy about checking the dish alignment but want to make sure it will be worth it since I have 2 lnbf's on that dish it's a bit more complicated. I hate to touch it to gain nothing. Been there done that
- 06-02-2008 12:26 PM #77
I can't get 11720 any better than 30%Q now. First I thought maybe it was a new spotbeam arrangement or something, but it appears it can't be the case. It wouldn't make sense the way the Equity feeds are allocated between 11800 and 11720.
I wish someone in the know could explain why a new satellite would still have a lower signal level on the same TP frequency as the previous one.Dishes in current use...
10' Unimesh with BSC621 scanning the arc, 6' Prodelin #1- 4DTV on AMC18C and SES1, 1m Primestar on G19, 90cm Ariza on AMC21, 1.8m Fortec Star on Anik F3, 6' Prodelin #2- G17C, AMC1, 6' Prodelin #3 on G14
Receivers in use...
Uniden Ultra C band analog, Diamond 9000HD, Pansat 2700A, Dish Network VIP211K
C band user for 23 years Proud antenna user with 18 OTA digital channels.
- 06-02-2008 12:59 PM #78
11720 was working here in Regina till about 2:00 yesterday, then nothing. All other transponders are fine.
36" Digiwave with DG240HH motor, Invacom Quad seeing 58W to 129W; Fortec Lifetime Ultra (main reciever); Digiwave Diamond 9000 HD,KWorld DVBS100 PCI card with DVBviewer Pro (for 4:2:2 feeds); for analog; Previously subbed Starchoice 301
6ft Startech Mesh C-band hooked to a Digiwave DG7000 aimed a 91 west for testing --- will be put up at the cottage next summer.
- 06-02-2008 03:04 PM #79
G10R currently has a orbital inclination of .1026. That's not real good for a stationary satellite. Since its walking back and forth over the equator, that may explain why some people have the signal fading in and out. Have fun.
*Antennas In Operation* C-Band: Two 5.5 ft mesh, 6 ft mesh, 7.5 ft mesh, 10 ft fiberglass, 12 ft mesh.....C/Ku-Band: 10 ft mesh, 10 ft mesh-dual actuator.....Ku-Band: 10 ft mesh, 33 inch fiberglass, 33 inch metal, Directway oval, Winegard 630
*Receivers In Operation* Chaparral Monterey 140: Drake 1524, 1824: Echostar 600: General Instrument 550i, DSR922: Motorola DSR905: Pansat 2700A: Uniden UST4400 Super, SQ590
- 06-02-2008 03:16 PM #80
SatelliteGuys Guru
- Join Date
- Mar 9th, 2007
- Posts
- 6,871
-
Advertising
- SatelliteGuys.US
- has no influence
- on advertisings
- that are displayed by
- Google Adsense








LinkBack URL
About LinkBacks
Reply With Quote


Forum Threads
Bookmarks