Results 1 to 10 of 16
Thread: geniatech dvb-s
- 06-06-2009 01:03 PM #1
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53
geniatech dvb-s
ADVERTS 1
where are the linux driver for this card
geniatech digistar dvb-s
- 06-06-2009 01:03 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 06-07-2009 05:27 AM #2
SatelliteGuys Regular
- Join Date
- Feb 5th, 2007
- Location
- Eastern Ontario, Canada
- Posts
- 336
As far as I am aware there is no need for a driver unless you are talking about a specific application. I have one of these cards and it works fine with Kaffeine provided you have a kernel that contains the support for the card. The support has been in the kernel for some time so unless your kernel is really old likely you have it.
With the card in the box try
# dmesg | grep DVB
This should show whether your card was seen on boot up
and what the kernel was able to do with it.
- 06-08-2009 12:25 AM #3
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
mythtv
im using myth tv
i can only fine kaffeine player when installing kaffeine from
source, its some like sudo apt-get update install
then, it is somethin like sudo apt-get kaffeine
but it just simply installs a player for music
well on # dmesg | grep dvb
i get.......nothing like it just goes to same line
but when i type in
root@xxxx-desktop:/home/xxxx# dsmeg | grep video
[ 3.701676] pci 0000:00:0f.0: Boot video device
and thats all
can you help me see if i did something from ubuntu 9.04
other that that i will try a desktop not a server
you think it has to do something with bios and how its setup with ubuntu
im using vmware workstation 6.5.2 build-156.735
i had the same problem even when installing ubuntu on it self without any othe operating sytem
other that ubuntu 9.04. and did the same thing didn't read on boot i guess like you were trying to tell me if it woul read from the beginning
so im just going to try a desktop, other that that we can try to fix it
also at esc at boot says the following
ubuntu 9.04, kenel 1.26.28-11-geneicLast edited by batzzz19; 06-08-2009 at 12:33 AM. Reason: fixing it
- 06-08-2009 05:44 AM #4
SatelliteGuys Regular
- Join Date
- Feb 5th, 2007
- Location
- Eastern Ontario, Canada
- Posts
- 336
Genaitech Digistar 103G support was added in kernel 2.6.18 in Sept of 2006. It looks like you need to upgrade your kernel. There are lots of sites that try to help you upgrade the kernel, one place to start is
Upgrade Linux kernel
.
- 06-08-2009 09:41 PM #5
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
i didn't get far
how do i install redahat as im using x32bit
and server instel xeon motherboard
how do i do this.????????/
- 06-08-2009 10:26 PM #6
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
do you think
i need 8.04 with latest kernel or get jaunty 9.04 with latest kernel
which one should i install
- 06-09-2009 12:17 AM #7
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
working on it
im working on ubuntu 9.04server and the latest kernel 2.6.29
most important how to use emunation on kaffeine i found my way arount the player thing i was blind its on the video icon at the midddle right
now how to use emunation and patch the control if possible how to use it?
thanks
- 06-09-2009 04:52 AM #8
SatelliteGuys Regular
- Join Date
- Feb 5th, 2007
- Location
- Eastern Ontario, Canada
- Posts
- 336
What does
# dmesg | grep DVB
say now?
- 06-09-2009 04:08 PM #9
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
im still working on it
its installing at the moment so cant say yet
i downloaded linux-kernel 2.6.29.1.tar.bz2
and then i am on make do u know if i have to do make install too?
i went trougth the config part first
but at make it looks to be taking its time
do i need to run make install?
please help me to know that
- 06-09-2009 09:05 PM #10
SatelliteGuys Regular
- Join Date
- Jun 6th, 2009
- Location
- los angeles
- Posts
- 53 Thread Starter
ok this is what i did
but didn't work at dmesg | grep DVB
NOTHING JUST TO THE SAME LINE
i upgraded with linux kernel linux-2.6.29.1.tar.bz2
i follow how to extract it or unzip it with readme
then i tried from the same source to config not old conifg
and then i hit make and took about 4 hours to finish that part
and restarted the computer after it was done then i hit dmesg | grep DVB
AND NOTHING STILL WENT TO THE SAME LINE
LOOK LIKE MY CARD AINT READABLE AT BOOT
DO YOU THINK SOME THING IS WRONG WITH IT IT WAS WORKING PERFECTLY FINE WITH WINDOWS.
SO ANYWAYS. DO U RECOMMEND SOMETHING ELSE. IT DIDNT' LOOK LIKE THE KERNEL INSTALLED ANY CX88 FILES JUST OTHER TUNERS..???/
WICH KERNEL AND LINUX SYSTEM ARE U USING TO MAKE THIS CARD WORK?

LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks