Results 1 to 4 of 4
Thread: Transponders off
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 09-19-2009 07:28 AM #1
SatelliteGuys Freshman
- Join Date
- Dec 17th, 2004
- Posts
- 12
Transponders off
ADVERTS 1
Im running a motorized dish and seem to be on the Clark belt pretty well. It seems im missing some transponders when I scan, some that I think should be there, many do work but i've noticed some compared to Lyngsat info maybe 1 digit off, like 113223 instead of Lyngsat's 113222. Im not at my setup so I cant give more details right now im just wondering if that likely an lnb issue or just dish aiming issue...
Thanks for all the help folks,
Traken
- 09-19-2009 07:28 AM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Posts
- Many
- 09-19-2009 07:54 AM #2
- Join Date
- Feb 28th, 2008
- Location
- Near Chicago, Illinois
- Posts
- 5,058
That's normal....many do work but i've noticed some compared to Lyngsat info maybe 1 digit off, like 113223 instead of Lyngsat's 113222.10' Unimesh w/ DMX741, GBox 3000, AZBox Elite, SatHawk PVR800 with Motorized Prime Focus 36" Backup.
Diamond 9000, Motorized 80cm BJU Dish.
- 09-19-2009 10:12 AM #3
The No Pain Train
- Join Date
- Nov 17th, 2003
- Location
- Now Living In the Last House on the Left
- Posts
- 75,800
Proud Staff Memberwhen you blind scan the frequency may be off by + or - 2 and thats fine. Its when you're off by 10 or so that you'll have issues
Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 09-19-2009 08:46 PM #4
SatelliteGuys Freshman
- Join Date
- Dec 17th, 2004
- Posts
- 12 Thread Starter
Ok, thanks guys, my little brain was getting all messed up trying to get that cleared up, hehe, i think my motor and my wife were getting tired of it too...
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks