QQ-Box USB DVB-S Tuner - Unknown Device?

**1ADAM12** · 02-21-2010 01:35 PM

Hi Killergaboca-

Welcome-

Please download this driver file and unzip. Read the doc files on where to place the files. The driver on the disk you have is no good.
Be sure you have XP SP2 installed.

**killergaboca** · 02-21-2010 04:49 PM

Originally Posted by 1ADAM12

Hi Killergaboca-

Welcome-

Please download this driver file and unzip. Read the doc files on where to place the files. The driver on the disk you have is no good.
Be sure you have XP SP2 installed.

Thank you, i'll try tomorrow. I try to find the driver with your description. The chinese letters i can't see, but it doesn't matter. (i think) If you placed a link to the driver in reply, it's not working. I try to use it with sp3.

**1ADAM12** · 02-21-2010 08:13 PM

Killergaboca-

What lnb/dish/switch setup do you have?

What Software?

Go back to post number 116 and you will find the correct driver file posted there. The system will not let me double post a file.

**1ADAM12** · 02-21-2010 08:21 PM

A driver (LME0288) problem with certain programs and codec occurs that produces no video and little bits of audio. This can occur in BlazeDTV and ProgDVB.

DVB Dream does not seem to have this problem.

**1ADAM12** · 02-21-2010 08:27 PM

The QQ Box will work with a 4 port DISEqC 1.0 switch. It can have H-H motors in line but will not operate them.

If an Ecoda 22Khz switch is placed after the DISEqC switch the LME0288 driver will create a serious overheat problem in the QQ Box. Both LED's will turn off and L101 and C106 become very hot. The receiver will not operate in this condition and can be damaged.

**wallyhts** · 02-22-2010 07:21 PM

Anyone know what driver to use for TSReader?

**1ADAM12** · 02-22-2010 09:28 PM

None of the drivers work in AltDVB so my guess is that If TSReader doesen't work with the driver in post #116 then it does not have a compatible driver.

**1ADAM12** · 02-22-2010 09:35 PM

Re: Post #154

QQ Box Black screen and bits of audio. I have noticed that this seems to happen with only some TP's. Also I noticed in my Diamond 9000HD that RTV comes in fine with 78 SQ and a Universal LNBF but not at all with a Standard LNBF and SQ 89. At the same time the QQ Box will display the Standard LNBF SQ89 signal just fine. I have also noticed that one of the TP on AMC21 with a 4444 SR is slow to tune on the Diamond 9000HD. Being that we are dealing with consumer grade electronics some crap is to be expected.

**killergaboca** · 02-23-2010 05:02 AM

Originally Posted by 1ADAM12

Killergaboca-

What lnb/dish/switch setup do you have?

What Software?

Go back to post number 116 and you will find the correct driver file posted there. The system will not let me double post a file.

Thank you for your help! I use it with simple universal LNB with 65cm dish in Europe. The receiver system and dish settings are working with an other set top box, i just change the coax cable to qq box until i figure out how does it works. Now i see some more communication between qq and one player, but still no signal. Need time to practice or a miracle. Next month i'm travelling, there i want to use it. I asked for a driver the seller and he sent to me this download link, i think it's the original cd content for qq box:
2shared - download T-3.rar

**realbigmike** · 02-23-2010 07:35 AM

1ADAM12, you said around page 9 that the qqbox wouldnt work with a Dish LNB (Legacy LNB). There were mixed reports about qqbox working in win7 as well.

I am confused, I just ordered one and it hasn't shipped yet. Could you please post an update of the current compatibility regarding win7 and legacy LNB?

I am using DVBdream, if that makes a difference.