Results 1 to 10 of 13
Thread: NBC Mux on AMC 6 (72W)
- 11-23-2009 05:30 PM #1
NBC Mux on AMC 6 (72W)
ADVERTS 1
Anyone receiving the NBC mux?
It is not coming up for me but I am getting Gospel Broadcasting Network so I a pretty sure I am on the satellite.
- 11-23-2009 05:30 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Posts
- Many
- 11-23-2009 05:48 PM #2
I'm getting the Mux just fine.
-Brent
1.0M Ku dish/DG-380/ -Quad linear lnbf, Solomend 800 PVR (7/31/2011 Software).
6 ft BUD /Dual Orthomode feedhorn, Manhattan RS-1933,version 3.8 software .
CS8000, Skywalker-1( s/n #21), Profs 7500, hanging from various cables from WNC 4x8 powered switch-
- 11-23-2009 05:54 PM #3
What's the deal with that? Sometimes it comes in fine on one meter grade dishes. Other times, it seems to be down in the dirt...
- 11-23-2009 05:57 PM #4
- 11-23-2009 06:53 PM #5
It's not watchable for me tonight, but I have it on an 18" dish due to my 30" dish being aimed too far away to include it. Other times it's fine, or even strong.
Here's the weird part: right now the gospel channel is strong for me. Normally, it's around the threshold, if not below it.Dish 1000.4 Eastern Arc dish, ViP 622 with broken HDMI port
GeoSatPro 90cm dish, Sadoun PowerTech DG-280 motor, DMS Avenger PLL321S-2 LNBF, Solomend PVR-800 (Openbox S9) receiver
- 11-23-2009 07:10 PM #6
I bet if you ajust the dish you will bring in the mux and lower the signal on the gospel channel. I use this sat alot with my 500 dish and it is a matter of adjustments. I find this happen a lot on smaller dishes its like each transponder has a sweet spot on the dish. I'm in south NJ.
Mike Lib
- 11-23-2009 07:15 PM #7
working fine here on a 30" dish
Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 11-23-2009 07:53 PM #8
That religious and shopping channel was very weak for me about 500pm today, only about 30% quality and breaking up, it's usually pretty strong. Other channels were fine.
Icon 550, Vantage 1100HD (thanks Stogie) on .90M primestar DG380 motor.10'Sami+GI650 for c-band.
CS5000 now on 1m primestar-polar mount backup system.
Avatar: Kepler20E, artist's conception, see NASA's Kepler Mission page:http://www.nasa.gov/mission_pages/ke...20-system.html
- 11-23-2009 07:57 PM #9
SatelliteGuys Regular
- Join Date
- May 27th, 2008
- Location
- San Diego, California
- Posts
- 378
Sometimes the same happens to me, i can receive the mux fine with a good 60-70 Q on a Pansat, but the next day without moving the dish i only have 35-40 Q, i just trimmed some olive trees in the backyard so i hope to get better readings (i'm using a 10 ft. prime focus with a C/Ku LNB South of California).
Cheers
Mike
- 11-23-2009 08:01 PM #10Dish 1000.4 Eastern Arc dish, ViP 622 with broken HDMI port
GeoSatPro 90cm dish, Sadoun PowerTech DG-280 motor, DMS Avenger PLL321S-2 LNBF, Solomend PVR-800 (Openbox S9) receiver

LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks