Results 1 to 10 of 15
4Likes-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 02-09-2012 09:28 PM #1
SatelliteGuys Regular
- Join Date
- Jan 25th, 2012
- Location
- Wales
- Posts
- 65
Channel Master Dish Logo Decal Dimensions
ADVERTS 1
Hi this is a really silly question but does anyone have the dimensions to decal Channel Master used to put on their dishes, not the Andrews or ASC Signal spikes.
Attached is the recreated decal I've made but I'd like to print it correctly got some left over laser vinyl and may as well use it.
Cheers104cm Gibertini: Motorised with Technomate TM-5402HD and TBS6925 PCI-e Card
90cm Gibertini: Fixed with 4 LNB's getting 7°E + 9°E , 13°E, 19.2°E, 28.2°E + 28.5°E with Media Centre PC and Pure Evoke Flow Radio
100cm Channel Master: Fixed at 22°W with Ross HDR-6100USB
- 02-09-2012 09:28 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 02-10-2012 01:35 AM #2
SatelliteGuys Regular
- Join Date
- Jan 23rd, 2007
- Location
- St. Louis Park, Minnesota
- Posts
- 128
Nice gfx!
Quali-tv QS1080IR, GEOSATpro DSR-200c, Andrew 1.2m dish, Fortec 1.2m dish, Channel Master feedhorn, Invacom QDF-031 LNBF, WSI DMX-741u C-Band LNBF, Homemade Stacked Scalar Ring, SG2100 Motor
- 02-10-2012 05:53 AM #3
SatelliteGuys Guru
- Join Date
- May 6th, 2005
- Location
- Metro New Orleans, LA
- Posts
- 5,778
On my 1 meter CM, as close as I can tell (it's still dark and the edges are a bit tattered), the decal is 3 1/2" wide by 4 1/8" high.
Originally Posted by remlap 
Current systems: 2X Visionsat IV-200 PVRs; Pansat 2700; Digitrans DTE-7150 DVB/Digicipher II; Twinhan and Nexus-S PC DVB cards; SiliconDust HDHomeRun ATSC/QAM networked tuners; fixed 1 meter Channel Master dish with Eagle Aspen P870 FSS Ku-Band stacked LNB; 2X 3ABN 36" dishes with Invacom QPH-031 Ku/DBS-Band LNBFs on Moteck SG-2100 H-H motors; fixed Sadoun SD180G 1.8 meter dish with Eagle Aspen B1SAT STACK C-Band stacked LNBF; Winegard Square Shooter OTA DTV antenna
- 02-10-2012 09:28 AM #4
SatelliteGuys Regular
- Join Date
- Jan 25th, 2012
- Location
- Wales
- Posts
- 65 Thread Starter
Hi Tron, thanks very much for going out and check for me. That's great.
Will post photos later.104cm Gibertini: Motorised with Technomate TM-5402HD and TBS6925 PCI-e Card
90cm Gibertini: Fixed with 4 LNB's getting 7°E + 9°E , 13°E, 19.2°E, 28.2°E + 28.5°E with Media Centre PC and Pure Evoke Flow Radio
100cm Channel Master: Fixed at 22°W with Ross HDR-6100USB
- 02-10-2012 10:30 AM #5
SatelliteGuys Regular
- Join Date
- Jan 25th, 2012
- Location
- Wales
- Posts
- 65 Thread Starter
Here we go all done, looks good, won't remove the tooway decal because its probably be a different colour behind the decal once its removed.
Thanks again for dimensions.104cm Gibertini: Motorised with Technomate TM-5402HD and TBS6925 PCI-e Card
90cm Gibertini: Fixed with 4 LNB's getting 7°E + 9°E , 13°E, 19.2°E, 28.2°E + 28.5°E with Media Centre PC and Pure Evoke Flow Radio
100cm Channel Master: Fixed at 22°W with Ross HDR-6100USB
- 02-10-2012 02:24 PM #6
SatelliteGuys Junkie
- Join Date
- Jun 22nd, 2008
- Location
- Extreme Northwest PA
- Posts
- 1,523
Looks great!
My decal on my 1.2M is about the same at 4 1/4" H x 3 3/4" W.
- 02-10-2012 03:04 PM #7
SatelliteGuys Regular
- Join Date
- Jan 25th, 2012
- Location
- Wales
- Posts
- 65 Thread Starter
Thanks Dan and I am sure that will be handy to someone. Originally Posted by Dishman Dan 104cm Gibertini: Motorised with Technomate TM-5402HD and TBS6925 PCI-e Card
90cm Gibertini: Fixed with 4 LNB's getting 7°E + 9°E , 13°E, 19.2°E, 28.2°E + 28.5°E with Media Centre PC and Pure Evoke Flow Radio
100cm Channel Master: Fixed at 22°W with Ross HDR-6100USB
- 02-11-2012 04:51 AM #8
SatelliteGuys Guru
- Join Date
- May 6th, 2005
- Location
- Metro New Orleans, LA
- Posts
- 5,778
Looks great Remlap! I'll have to do that with mine one of these days, maybe after it gets cleaned and has a fresh coat of paint Originally Posted by remlap 
... Current systems: 2X Visionsat IV-200 PVRs; Pansat 2700; Digitrans DTE-7150 DVB/Digicipher II; Twinhan and Nexus-S PC DVB cards; SiliconDust HDHomeRun ATSC/QAM networked tuners; fixed 1 meter Channel Master dish with Eagle Aspen P870 FSS Ku-Band stacked LNB; 2X 3ABN 36" dishes with Invacom QPH-031 Ku/DBS-Band LNBFs on Moteck SG-2100 H-H motors; fixed Sadoun SD180G 1.8 meter dish with Eagle Aspen B1SAT STACK C-Band stacked LNBF; Winegard Square Shooter OTA DTV antenna
- 02-13-2012 06:33 AM #9
SatelliteGuys Regular
- Join Date
- Jan 25th, 2012
- Location
- Wales
- Posts
- 65 Thread Starter
Am I right to assume the decals are actually transparent where mine has white, I might be able to get some transparent printable vinyl for not much money, Ill remove that decal and print off another on some transparent laser vinyl.
104cm Gibertini: Motorised with Technomate TM-5402HD and TBS6925 PCI-e Card
90cm Gibertini: Fixed with 4 LNB's getting 7°E + 9°E , 13°E, 19.2°E, 28.2°E + 28.5°E with Media Centre PC and Pure Evoke Flow Radio
100cm Channel Master: Fixed at 22°W with Ross HDR-6100USB
- 02-13-2012 03:51 PM #10
SatelliteGuys Junkie
- Join Date
- Jun 22nd, 2008
- Location
- Extreme Northwest PA
- Posts
- 1,523
The decal on my 1.2M has a white area and a clear area. If I can get my camera back from my brother I will try to snap a photo in the next day or so. Originally Posted by remlap
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks