Results 11 to 15 of 15
Thread: 4x4 Multi-Switch Problem?
-
LinkBack
LinkBack URL
About LinkBacks- Bookmark & Share
- Digg this Thread!
- Tweet this thread
- 10-19-2008 09:35 PM #11
SatelliteGuys Regular
- Join Date
- May 1st, 2006
- Location
- Texas
- Posts
- 388 Thread Starter
ADVERTS 1
Ok, I swapped the dishes and put AMC4 on the side with the 22K. I lost all the channels. So I put them back like it was and got my channels back. That was tedious too because the switch is mounted on a block wall under a rain cap.
Bypass the switch all together? The LNBF is functioning because I am getting the Galaxy 25 channels on the Buzz receiver. Isn't that a safe assumption?Ultra directly to either port of the Galaxy 25 LNBF
- 10-19-2008 09:35 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 10-19-2008 09:38 PM #12
The No Pain Train
- Join Date
- Nov 17th, 2003
- Location
- Now Living In the Last House on the Left
- Posts
- 75,800
Proud Staff MemberShane
When you swapped the cables (making 101 on the 22k and 97 on the 0k) you have to change the setting in the receiver
G25 would be 22k OFF and 101 would be 22K ON if you swap themWinegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 10-19-2008 09:39 PM #13
The No Pain Train
- Join Date
- Nov 17th, 2003
- Location
- Now Living In the Last House on the Left
- Posts
- 75,800
Proud Staff MemberAlso I have to state the obvious...
The LNB setting on G25 on the Fortec is set to 10750, right??Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
- 10-20-2008 10:34 PM #14
SatelliteGuys Regular
- Join Date
- May 1st, 2006
- Location
- Texas
- Posts
- 388 Thread Starter
Yes, the LNB setting is 10750.
Maybe another day when I am ready to scrap the skin off my knuckles I will switch them around again and that change the 22K setting on the receivers. I didn't realize there was a 22K setting.
- 10-21-2008 12:54 PM #15
The No Pain Train
- Join Date
- Nov 17th, 2003
- Location
- Now Living In the Last House on the Left
- Posts
- 75,800
Proud Staff Memberso on the Fortec you get no channels on G25?
Winegard 76cm dish, SG2100 motor, Sadoun dual KU LNB..... Directv Slimline SWM 3 LNB.... GeoSatPro 36" dish with Sadoun dual KU LNB... Coolsat 5000 on motorized.... Manhattan RS1933....Directv HR34 (yes the 5 tuner monster) GeoSatPro 200 to aim dishes.... few receivers not set up yet
Two 6 foot Fortec dish with GeoSatPro dual C-Band LNB "ghetto moved" to various C-Band satellites
Reply With QuoteTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Bookmarks