EPG active?

[shibby191]

Just wondering if the EPG is working yet on the new receivers. I've got the new DVR and it's been plugged in about a day and so far the EPG doesn't have any program data in it.

Thanks!

[Glorystar1]

EPG data is still being acquired from broadcasters. The technology is tested, but not yet implemented. We are targeting Q1, 2009.

[Glorystar1]

Corrected to 2009....

[shibby191]

Excellent, thanks for the update!

[MikeC]

Along the same lines, is a Program Guide on the web possible?

[Glorystar1]

Web Based Programming Guide will be first and then the data then shared with the EPG.

[elder]

I assume that time would not be a problem for the EPG if the transponder time is off six minutes the EPG should be in synch with the error. However, unless something changes I won't be able to use the EPG for recording. It takes so long for the DVR-1100c to check USB that I would miss program start. I generaly set my timer a minute or so early and overrun by a minute or so. This precludes a sequential timer for another channel.

[Glorystar1]

Reliable recording with or without EPG relies on the correct time being referenced. The Glorystar EPG server references UTC. The uplink center has repeatedly indicated that the encoder is set to reference UTC. We have requested that the engineer resync and look into this reoccurrring issue.

Maybe your USB drive is in a power saving or sleep mode? The test USB drives in our center start recording in 3 - 5 seconds. Try a different drive or see if te drive manufacturer has software for disk management.

I assume that time would not be a problem for the EPG if the transponder time is off six minutes the EPG should be in synch with the error. However, unless something changes I won't be able to use the EPG for recording. It takes so long for the DVR-1100c to check USB that I would miss program start. I generaly set my timer a minute or so early and overrun by a minute or so. This precludes a sequential timer for another channel.

[elder]

I am having similar problems with both Maxtor OneTouch 4Plus and a Flash Drive. I'll run comparison tests and accurately time the delay on both ends sometime after Christmas and post as a new topic.

[dau191]

I am considering buying the 1.2 meter dish that Geosat/glorystar/sat AV offers. But I am allready using a Pansat 250sm and a coolsat 5000. Will glorystar epg signal work with either one? My kids love SOAC! Wonderful channel! I am picking up the epg on 105W for Bob jones U and can even pick up someone elses when I watch NASA on 119W. My kids would love to see what is on next.
Wade