Dvr-1100c - DiSEqC 1.1 support

[meinename]

Would it be possible to add diseqc 1.1 support in a future firmware release?

That would make this the cream of the crop of Standard Definition receivers!

[Glorystar1]

Will add that to the implementation list. Shouldn't be a problem.

[meinename]

Excellent, must add that the request is for being able to cascade all of the switches when you add this in.

Example:
RECV => DiSEqC1.1 => DiSEqC 1.0 => SWXX => 22kHz

and the various combo's therein.

Finally broke my 4 LNB limit and realized that I could not order a DiSEqC 1.1 to free up my 2x SW21 and 2x 4-port Chietas for use elsewhere.

On top of that I don't want to use SW21 if possible since their control tones have reception effects both ATSC chipsets that I use.

Checking after the firmware update to 3.17, I have less than a second of playback on my Zenith DTT-900's and DigitalStream DTX-9950's that is effected when switching to an LNB on a SW21.

[Iceberg]

why would you want to cascade all those switches?

Once Diseqc 1.1 is implemented then just add 4x1 switches on the inputs of the 8x1

[Glorystar1]

DiSEqC 1.1 switch protocol would support the 22KHz and DiSEqC switch cascading, but not all variants (Dish Network SW) types as you suggest.