Cant Find G19

[agarrett22]

Hey all. Have spent 3 eveings trying to get my install complete. I currently have the glorystar system with 2lmb's I am aiming for 101W and 97W. Currently I am getting 101W with no issues. Skew is correcet for my location, Everything plum but i just can't seem to get 97W at all. I have seen it twice but then it goes away. any sugestion on what i should try. I have hooked to the single lmb to try to aquire signal. Kinda wondering if i got a bad lmb.


Any ideas whould be great.

[Glorystar1]

Hey all. Have spent 3 eveings trying to get my install complete. I currently have the glorystar system with 2lmb's I am aiming for 101W and 97W. Currently I am getting 101W with no issues. Skew is correcet for my location, Everything plum but i just can't seem to get 97W at all. I have seen it twice but then it goes away. any sugestion on what i should try. I have hooked to the single lmb to try to aquire signal. Kinda wondering if i got a bad lmb.


Any ideas whould be great.

• Did you perform a string test on the dish to verify that it is not warped or bent?
• If you are on the east coast is the left LNBF lower than the right? If on west coast, is the right LNBF lower than the right?
• Verify reception of Channel 500 CGN TV on the right side LNBF #1 with direct connection (no switch) between receiver and LNBF.
• If Channel 500 is 50% Quality or better, physically swap the LNBFs and verify that Channel 500 is still received.
• If both LNBFs are receiving Channel 500 CGN TV, then you have verified that both LNBFs are working.
• Place the receiver on Channel 101 TBN and direct connect to left side LNBF #2. Is Channel 101 TBN showing Picture and Quality reading above 50%?
• If not, slightly bump the dish up/down/left/right to acquire Signal Quality reading. If no Quality reading, then there is a mechanical reason. I.E. Not clear line of sight, warped dish, bracket rotated wrong direction, LNBFs rotated and not the bracket, etc.

[agarrett22]

Just to let you know. I Got it all working tonight. Swapped the lmb's around and did a little tuning and it all worked. Think i do need to get a new switch but its no big deal for this install because all we are looking for is TBN on gallexy 19.

Just glad to finally get it to work

[rv1pop]

Glad it is working. I, too, mainly watch TBN.... KCBI lives on!
POP