How to sets Time & Date for Voom box.

**t_n** · 07-26-2006 09:34 PM

Need help.

I can’t find any where that let me change it.

Thanks.

**lilyarbie** · 07-26-2006 10:01 PM

The receiver will not allow you to change the time nor the date. Those were originally only updated via satellite when Rainbow-1 was in operation by Voom.

**t_n** · 07-26-2006 10:42 PM

Ah! I see.

One more question,

What about component (Y, Pb, Pa) cable? Do they shut this function down also? There’re a lot lines across the TV screen when I used this connection.

Thanks.

**riffjim4069** · 07-27-2006 09:23 AM

Component output should continue to work just fine...mine does on my older component only Mits. Make sure the output on the VOOM receiver matches what your HD set can accept. For example, my Mits accepts 1080i and if the VOOM receiver is set to 720p (or native passthrough and the channels is broadcasting at 720p) then it won't work.

**t_n** · 07-27-2006 01:07 PM

Thanks for your times and the image.

I had a older Sony 27” set (tube). Have to play a little more.

Thanks again.

**lilyarbie** · 07-27-2006 01:12 PM

I have a 35-inch Sanyo in my bedroom that takes only 480 interlaced, so I have to force it to that mode to watch anything. As for my HD screen, I have a Mitsubishi that doesn't take 720P so I have to force it to 1080i.