Travel with 722 model?

[dummy]

I currently use a VIP211 at each of two homes and on the road with my travel trailer. I'm thinking of getting a 722 DVR and wonder if there are any special considerations or problems that might be associated with unhooking the 722 from one place and moving it to another and re-hooking up. I realize I can't drop the unit and things like that. I'm referring to any technical issues associated with cabling, switches, etc.

Finally, I'm only talking about moving the 722 itself. I already have a outside dish installed at each place.

Thanks for any comments!

Warning: This is an Old Thread This discussion is older than 90 days. information contained in it may no longer be current

[garys]

Just that it requires two coax lines as opposed to the one for the 211. Of course, if you are using DPP lnb's/switches, you can use a DPP Separator on one line.

[navychop]

Audit police.

[dummy]

Garys- That comment went way over my head. At both of my homes I only have a single RG-6 cable to goes from inside the house up to the dish on the roof. Can you tell me a little more about those switches? Would DISH install them for me and can they travel easily?

[iwannarock1]

---

ADVERTISING BOX

---

What type of dish do you have, Is it for 2 satelites or 3?
If you have the 1000.2 dish with 3 satellites(3 round circles), you will be fine with 1 cable just like you currently have.

If you have only 2 satellites(Dish 500) then you need to make sure you have the correct LNB on the dish, a Dish Pro Plus(DPP) so that you can get by with 1 cable from the dish.