Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!
- JOIN US AS A MEMBER TO GET RID OF MANY OF THESE ADS INCLUDING THIS BIG AD BOX!!!
- This message (and many of these ads) will appear on every screen until you register! CLICK HERE to Register for FREE!
connecting to new dish
i bout a new dish network turbo hd dish with the dp plus head for tailgating. I need to know which connector to connect to if I am just hooking 1 hd receiver to it. the lnb head has 4 connectors on it a 1, 2 ,3 and lnb in
The reciever i am hooking up to only has one dish in connector on it
Last edited by birdsup35; 08-13-2009 at 06:22 PM.
08-13-2009 05:42 PM
Originally Posted by birdsup35
Any port will work fine. Except the LNB IN.
You only need too hook up one cable also. Just use a DPP Separator.
the receiver i am hooking to only has one dish in connector. Do I still need the seperator???
So I can hook up to 1,2, or 3 on the dish and get all my channels?
Single tuner receivers do not need the separator. The switch is built into the lnb, you will get all the sats that your dish sees by connecting to any one of the outputs.
Tags for this Thread