Results 7 to 11 of 11
02-27-2010 03:17 AM #7
If you do not want to do the install youself. I would suggest to call Dish and explain that you already have the Dish 1000+ kit. That all you need is for the tech to come out and re-installed and aligned the dish is all. If all else fails, You could email the ceo office at Dish and explain to them in detail about it.
02-27-2010 03:17 AM # ADSRegister Today & This Ad Goes Away! Syndicated Advertisement
- Join Date
- Advertising world
02-27-2010 08:09 AM #8
Or try a local retailer, it maybe cheaper than Dish.Sometimes I miss the old days when we had three channels on the TV, Back then I went to bed at a decent time.
02-27-2010 08:25 AM #9
Yes you can do it , But as the others said you would still have to reajust the dish.
Because the bracket that you mount the reflector on is different. So the 500/1000+ dishes won't just mount right up to a 1000.4 hardware because the screw holes are different.
Just use common sence, and you'll see what you have to do to mount the 1000+ reflector to the 1000.4 setup.
You have both dishes already so it should be a snap since you can see first hand the setups.
I would call for reajustment, if you have the Protection plan it will only cost $15, well worth it IMO.
And a few hours before they get there,set up the hardware, and you'll have barely any downtime before the Tech arrives.
02-27-2010 08:29 AM #10
02-27-2010 08:33 AM #11
500/1000 Plus 24x32
Super Dish 20x36