Results 1 to 6 of 6
Thread: Neusat HD 9000
-
06-04-2010 09:44 AM #1
Neusat HD 9000
Does anyone know if Neusat HD 9000 works with Galaxy 19 and blind scan on Galaxy 19...
thanks
Warning: This is an Old Thread
This discussion is older than 90 days. information contained in it may no longer be current
-
06-04-2010 09:44 AM # ADS
Register Today & This Ad Goes Away! Syndicated Advertisement- Join Date
- Always
- Posts
- Many
-
06-04-2010 01:55 PM #2
There is plenty info in this thread. Take the time and go all over the 3 pages in detail Regards
Neusat HD 9000 Receiver Review - SatelliteGuys.USProud to be a subscription-free household - FTA & OTA only
NSS 806 @ 40.5 W, Intelsat 14/ 805 @ 45/55.5W, Galaxy 19 @97 W C band, AMC 1 @ 103 W
Gal 16 @ 99W, Gal 17 @91W ,Hispasat 1C/D 30.0W
(1) Solomend, (2) S9, (1) S10, (1) RS1933, (1) CS8100HD
-
06-04-2010 05:42 PM #3
it will work fine with G19
Whether or not the blind scan works...well thats debatable
Directv Slimline SWM 5 LNB and DirectvWorld dish on the roof of the apartment building...Directv HR34 AKA Genie
All FTA stuff in storage right now
-
06-04-2010 06:03 PM #4
Its a nice receiver but the blind scan isnt really that good!At least on mine it isnt!It tends to lock up durning the scan.
36" motorized dish on garage roof and 6' sadoun dish! w/ DMX741, VBox powermax ver10,AZbox Ultra Hd using the 6 footer and GEOSATpro DRS200c+solomend running the .90cm ku dish. Neusat 9000 at backup.
Stan The FTA Man
-
06-04-2010 10:21 PM #5
As long as you're not trying to get PBS HD on 125w with it you'll be OK!
I bought 2 of them, brand new, off eBay for 140 bucks, and one of 'em hasn't even made it out of the box yet! Nice HD picture, once you get it to actually find the signal, but it's the most aggravating thing I own right now!
Tivo Series 3 HD DVR, AZBox Elite HD, Pansat 9200, Coolsat 8000, Neusat 9000, 4 Ku & 2 C-band dishes, and a Roku 2 XD
SatelliteGuys Radio.... listen NOW: http://radio.satelliteguys.us/
-
06-04-2010 10:41 PM #6Wile I've not tried PBS HD with it, I love mine, it found most all of the signals I have tried, blind scan works for me, but I have had it lock u[p a few times but not enough to be a PIA, the only thing that agrivates me is that you can't do manual PIDs, that is a problem.
ADVERTISING BOX
Terry


Register To Reply

