Results 1 to 6 of 17
09-26-2011 10:40 AM #1
Invacom QPH-031 Used with Six foot Satellite Speial Dish?
Has anyone been able to adapt/rig/interface/use, an Ivancom QPH-031 with the six foot satellite dish special, without any problems.
I am trying to see if it is possible to somehow use the QPH-031 with this dish.
I am looking forward to adapt this LNB to the Six foot Special dish.
I believe that someone on this forum had a thread on this subject, did some research but cannot locate it.
I will continue to search the forum, in the meantime any informarion is appreciated.
09-26-2011 10:56 AM #2
What is the "Six foot Special dish"?
09-26-2011 11:02 AM #3FTA BumpkinC-Band: 12' Unimesh/AJAK 180/GeoSat C2***10' "Perfect 10" mesh/GeoSat C2*** 8.5' Birdview solid/BV H-H/GeoSat C2*** 7.5' Unimesh/CalAmp voltage-controlled LNBF***...C-Band LOS from 58W-139W
Ku-Band: 3ABN .9m/SL1PLL LNBF/SG2100***Fortec .9m/TrackerII LNBF/STAB HH90***7.25' Birdview "Spoon"/TrackerII/70:1 BV H-H***Prodelin 1.8m/GeoSat Bullet/AJAK 180 H-H***Paraclipse Hydro 1.5m Prime Focus/Linear Actuator/C120 LNBF...Ku-Band LOS from 30W-129W
Receivers: Toshiba TRX-1820 Analog-->AZBox Elite/Openbox S9 HDx2***GeosatPro microHD
OTA Digital: CM 4228/CM 7777 Preamp/Apex DT-250 for OTA Locals, Toshiba 46" Regza & Toshiba 19" LCDs
In Progress: (2) Birdview 8.5' (1 solid & 1 perf) w/Birdview H-H mounts, "Drake" 10' solid alum....*BVOC Asst. Cook & Bottlewasher*
09-26-2011 11:21 AM #4
Are you asking if it's possible to use an LNBF intended for an Offset Dish on a Prime Focus Dish?
If so, then yes, it will work, not perfect, but will work. When there were a bunch of Circular Feeds available, I had 1 strapped next to the C Band Feed.
09-26-2011 11:38 AM #5
- Join Date
- Feb 11th, 2005
- Slidell, Louisiana
- Post Thanks / Like
- Thread Starter
09-26-2011 11:47 AM #6
All C Band and Linear Ku was thru the DMX741, and only Circular was thru the QPH031.
Used an external DiSEqC Switch.