Results 1 to 6 of 6
Thread: Help with Internet Connectivity
-
08-10-2012 11:17 AM #1
Help with Internet Connectivity
I've got S221 on two Hoppers connected to two Joeys via the duo node. I have DSL service with the modem feeding a switch with one line feeding one Hopper. The connected Hopper has Bridging enabled and the other Hopper has Bridging Off. I know on the last SW217, I had internet connection and could get the Olympic App.
Now, on the Connected Hopper, the Broadband menu screen shows;
Home Network Connection Status: Not Connected.
DHCP Acquired: OK
Server Connection: Failed
Internet Connection: Failed
From the TEST Connection Menu, Broadband Connection is OK
From the Send Status menu, Connection says Broadband is detected and the Send Data is successful.
On the other Hopper not physically connected, nothing shows a successful connection.
Any suggestions? I should not have to pursue a HIC to get this to work. Any ideas or suggestions?
-
08-10-2012 11:17 AM # ADS
Register Today & This Ad Goes Away! Syndicated Advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
08-10-2012 11:25 AM #2
- Join Date
- Sep 8th, 2003
- Location
- NE
- Posts
- 2,435
- Post Thanks / Like

- Thread Starter
Never mind. RBR to the rescue! I did a simultaneous RBR on both Hoppers and now everything is GREEN showing all connected on both Hoppers!
-
08-10-2012 09:23 PM #3
I assume you mean hitting red blue red correct. I will try this after primetime anytime gets done recording.
I am having the same issue not connecting to the internet. I have a hopper internet connector and before yesterday everything had been working with my hopper since it was installed a few months ago.
Now when I go my broadband settings moca is not connected and says failed next to dhcp, server and internet. I tried to watch an on demand movie and said I want connected to the internet. I am not sure if the hic went bad, the network cable which run from one side of the house to the other are bad. I tried replacing my router and network card in my computer.
I haven't made any changes to anything and live by myself.
-
08-10-2012 10:34 PM #4
- Join Date
- Sep 8th, 2003
- Location
- NE
- Posts
- 2,435
- Post Thanks / Like

- Thread Starter
RBR = red button reset.
-
08-20-2012 02:54 PM #5
RED BUTTON RESET worked to get my 2 Hopper bridging up and running.
-
08-20-2012 04:54 PM #6In my 2 weeks I've had to resort to RBR a few times. Good news is that it doesn't take nearly as long to reboot as the DTV equipment I had. It was a full 5-10 minute endeavor each time
ADVERTISING BOX


Register To Reply
