Results 1 to 6 of 11
-
08-16-2012 02:52 PM #1
SatelliteGuys Freshman
- Join Date
- May 25th, 2006
- Posts
- 7
- Post Thanks / Like
lost all vertical transponders signal
Hello everybody:
I have collsat4000+ looking at galaxy 19; couple of days ago all vertical transponders signals are not coming up even after auto scanning. I don't know whats is going on. Is it LNB, or receiver itself? I did not had this problem before.
Best
-
08-16-2012 04:15 PM #2
Proud Gold Sponsor
- Join Date
- Sep 3rd, 2004
- Location
- Roseville, CA
- Posts
- 5,817
- Post Thanks / Like
If you have a voltage meter, test the voltage on the coax from the receiver at the dish. It should read 13vdc on vertical and 18vcd on horizontal (+/- 10%).
The failure might be either the LNBF, coax, connector or the receiver.Satellite AV, LLC (Gold Sponsor)
Equipment Development / Distribution / Repair / Call Center
888-483-4673 - http://www.satelliteav.com
eBay Special Deals
Attention Installers: Want more work? Join the Largest Satellite Technician Referral Website - www.FTAinstall.com
-
08-16-2012 05:54 PM #3
SatelliteGuys Freshman
- Join Date
- May 4th, 2006
- Location
- Alden NY
- Posts
- 9
- Post Thanks / Like
If you are referring to the CBS network feeds, I lost them too! They are Vertical at 4080 on G19. Anyone else notice a signal change on that transponder?
-
08-16-2012 06:38 PM #4
- Join Date
- Feb 27th, 2010
- Location
- 97W 48N
- Posts
- 3,258
- Post Thanks / Like
4080 is nonexistent here. Check operation(Q) on other vertical transponders.
One night I walked home very late and fell asleep in somebody's satellite dish.My dreams were showing up on TV's all over the world. -- Steven Wright
Openbox S9, Pansat 3500SD, 139w to 55.5W +30W
10Ft USS Steel BUD and an assortment of P⭐ dishes, 84e(1), .7m(2), 1.2m(2). 2.4m[8ft](1) offset in storage. 🐱
-
08-18-2012 11:46 AM #5
SatelliteGuys Freshman
- Join Date
- May 25th, 2006
- Posts
- 7
- Post Thanks / Like
- Thread Starter
I checked for vertical voltage reads 20.7 volt, I changed the lnb now I only receive one vertical transponder (12.840, V, 22k)out of total 23: I think the receiver gone bad don't you think so?
Best
-
08-18-2012 11:49 AM #6
- Join Date
- Feb 27th, 2010
- Location
- 97W 48N
- Posts
- 3,258
- Post Thanks / Like
And what's the voltage when a horizontal transponder is selected? AND are these voltages with the LNBF connected? And is the one transponder you are getting on the polarity you have selected?
ADVERTISING BOX
>> 12.840 << HUH? Only freqs between 11.7 and 12.2 on that sat.One night I walked home very late and fell asleep in somebody's satellite dish.My dreams were showing up on TV's all over the world. -- Steven Wright
Openbox S9, Pansat 3500SD, 139w to 55.5W +30W
10Ft USS Steel BUD and an assortment of P⭐ dishes, 84e(1), .7m(2), 1.2m(2). 2.4m[8ft](1) offset in storage. 🐱
Register To ReplyTags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
