Hopper 40.0 UHF Remote

[Bradtothebone]

Works fine with my Denon 4802. I know that doesn't help you, but I bet there's a way, assuming the remote isn't defective. Keep trying!

[mdavej]

It sounds to me like your remote is simply in Limited mode. If power works, then you have the right code. You also need to set up volume punch thru. Your denon uses a very common code, and they haven't changed in years, so I think whoever told you the 40 didn't have the newer codes is clueless.

[mebubba]

I am having same issue with my 40.0 and Denon AVR 1315. These are not isolated events as I see several people having issues with Denon and the 40.0. My system was installed 9/25. Step up Dish!

[sms1976]

Any help/solution on this? I also can't get the 40.0 remote to work with my Denon, even with the lookup function on the Hopper (AVR-1912 is listed). It will only turn the Denon off, nothing else. All my other Dish remotes have worked with my Denon Receivers.
Thanks!

[bchandler02]

Agree. Denon is usually easy, one of my AVR1910's is controlled via the Hopper remote. Setup using the remote manager on screen, works like a champ, at least for power and volume (all I care about).

[JAF]

---

ADVERTISING BOX

---

I have a Denon 1909 and a 2312. I used code 1361 for both and it works great. Give that a try.