Results 1 to 6 of 14
08-23-2012 06:14 PM #1
New microHD Firmware Release: GSP_MHD_010 Available for USB and Satellite Update (OTA-SSU) 08.23.2012
Release: August 23rd, 2012
Minor Firmware Update is now available. GEOSATpro firmware GSP_MHD_010 for USB Update or OTA-SSU updating via satellite Galaxy 19, transponder frequency 12115 (Do not change any other settings in the Manual Update Menu screen).
Warning: The GSP_MHD_010 update is a main system file and should not overwrite your settings and channel scans. You should back-up your current settings, set-up and firmware to a USB drive before performing the S/W Update via Satellite - Manual or USB. If you use a motor, you will need to re-enter your location Longitude and Latitude settings.
Back-up your current firmware to USB - Save to USB (ALLCODE) .abs
Save your user data to USB - Save to USB (userdb) .udf
Important Notice: After updating your receiver go into standby mode. Power cycle by removing and reinserting the power plug. Perform a Factory Reset before reloading your saved user data (.udf) or reconfiguring the satellite settings and scanning for channels.
MicroHD Firmware Release Notes:
* Corrected: Universal 9750 - 106000 LO Setting - Supports Blind Scan in the default Start 10700mhz / Stop 12200mhzSatellite AV, LLC (Gold Sponsor)
Equipment Development / Distribution / Repair / Call Center
888-483-4673 - http://www.satelliteav.com
eBay Special Deals
Attention Installers: Want more work? Join the Largest Satellite Technician Referral Website - www.FTAinstall.com
08-23-2012 06:14 PM # ADSRegister Today & This Ad Goes Away! Syndicated Advertisement
- Join Date
- Advertising world
08-23-2012 06:47 PM #2Pub Member / Supporter
You're so funny, Brian. I just switched a couple weeks ago from Univ to standard lnbf, and NOW you decide to fix this stuff !!! I'm really aghast !! lol
08-23-2012 06:51 PM #3
since I dont use Universals I'll hold off on this oneDirectv Slimline SWM 5 LNB and DirectvWorld dish on the roof of the apartment building...Directv HR34 AKA Genie
All FTA stuff in storage right now
08-23-2012 06:53 PM #4
08-23-2012 07:05 PM #5
I have successfully updated to the new one using the "Upgrade By Satellite" feature.
Thank you for the quick fix!
08-24-2012 03:12 PM #6
hoss e buck