Results 1 to 6 of 11
-
09-01-2012 11:41 PM #1
hispasat 30W (TV CABO zon) in canada
hey, currently im living in the GTA , ontario, and was wondering what LNB, and dish size i need to get the hispasat 30W, to get the TV CABO channels that are transmitted in portugal / europe. i had a friend who had this setup before, but we lost contact, and now i wanted to get this setup as well.
would like some insight on this please!
-
09-02-2012 03:24 AM #2
Welcome to the site. Sorry to be the barer of bad news.
If they're transmitted in portugal / europe think you'd have to be in Europe to receive them. I didn't see that channel listed on any of the N.A. beams on
lyngsat.com
. Don't see them listedGet rid of this ad below, as well as the link redirect by becoming a Supporting Pub Member
here
either. But for the channels listed a 36 inch dish works well.
One night I walked home very late and fell asleep in somebody's satellite dish.My dreams were showing up on TV's all over the world. -- Steven Wright
Openbox S9, Pansat 3500SD, 139w to 55.5W +30W
10Ft USS Steel BUD and an assortment of P⭐ dishes, 84e(1), .7m(2), 1.2m(2). 2.4m[8ft](1) offset in storage. 🐱
-
09-02-2012 11:59 AM #3
After a bit of research i found that TV Cabo is a provider in Europe and offer all kinds of packages on Hispasat beamed for Europe only,nothing for North America.
You can get some FTA channels on Hispasat here in North America and i suggest a dish no smaller than 36 inches for a good reception.
Tede
-
09-02-2012 06:25 PM #4
the size in the gta are 36 inch dish need and only have the channels for north america for the Europe side impossible and tv cabo Portugal never I like to have the tv cabo amigo eu sou Portugues.I have the hispasat lnb's are 10600 or 10750 ok
Last edited by tanka; 09-02-2012 at 06:33 PM.
-
09-02-2012 06:29 PM #5
1 hd portuguese channel, but biss encrypted.
-
10-08-2012 05:51 PM #6


Register To Reply


