Quantcast
Motorized Linear/Circular and 2 receivers, need switch(s)
Those listed below are our PROUD SatelliteGuys GOLD Sponsors!
Applied Instruments glorystar.tv satelliteavgs tele-satellite.com

Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!

Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 28th, 2012
    Location
    Canada
    Posts
    45
    Post Thanks / Like

    Motorized Linear/Circular and 2 receivers, need switch(s)

    Hi guys,
    When I originally bought my setup I wound up with a Dish Network 2 port switch which doesn't appear to work with FTA (I was only getting a handful of channels...some linear and some circular). Anyway, I want to have linear/circular in the house without having to go outside and swap the cable. One receiver is a microHD which I use daily and the other is a Coolsat 6000 which is going to get used if I break down and buy a 2nd TV.
    Could you please suggest a Switch to get this operational with the option of me scabbing on an LNB for NBC at a later date? I can put in as many home runs as necessary if I need multiple.
    Thank you, Steve
    Warning: This is an Old Thread
    This discussion is older than 90 days. information contained in it may no longer be current

  2. # ADS
    Register Today & This Ad Goes Away! Syndicated Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
            
     
  3. #2
    Join Date
    Sep 22nd, 2005
    Location
    L.A., Calif.
    Posts
    10,618
    Post Thanks / Like
    We have a FAQ which might help.
    Check the FAQ department for a Switches Simplified.

    More info on your LNBFs would be helpful, as well as dishes.
    You aren't trying to share cables with any of the pay TV services, are you ?

    A DishNet 2-port switch is not supported by so many receivers, so I'd never use one.
    (makes a too-unique system where you cannot introduce arbitrary new receivers)



    If you had only a single receiver, then a 4-port diseqc switch would be the way to go.
    But the minute you introduce a second receiver, the solution gets more complicated.
    Last edited by Anole; 09-30-2012 at 05:40 PM.
    Straight Talk on AT&T iPhone 4, iOS 5.0.1, BB 3.10.01.
    Retired Apple iPhone 3GS, iOS 5.0.1, BB 6.15.00.
    I repaired smashed screen & more on both.
    : BirdView 8½' solid & GBox V3000.
    :
    AMCI 8' perf (maybe a DH?) & AJAK-180.

  4. #3
    Join Date
    Jun 28th, 2012
    Location
    Canada
    Posts
    45
    Post Thanks / Like
    Thread Starter

    ADVERTISING BOX


    Hi Anole,
    I have carefully looked through the FAQ and the 4-1 Switch looks like the bare minimum for me. I have a fake QPH-031 LNB and I am determined to use the Circular side just for the sake of using it for my blind scanning entertainment. The motor is a Stab HH90 and the dish is a digiwave T90 which I'm getting signals in from 61W to 123W. What I don't see in the FAQ is multiple satellites with motors due to motor load through the switch? I could use the loop through on the Coolsat to get both working but this would take coordination between the two receivers which would be in different rooms should we get around to getting another TV...not sure if this is avoidable.
    Steve

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •