Results 1 to 6 of 29
10-13-2012 08:12 PM #1
why does the openbox s9 scan in nbc and fox on 99w but microhd won't?
i see fox puerto rico is not scanning in now on the microhd. went to the solomend s9 and scanned in perfect. will try again with the microhd. i have trouble downloading to the usb hard drive and then taking it to the computer and editing etc. just curious as to why openbox doesn't have any problems with these two channels. thanks, charlie
10-13-2012 08:12 PM # ADSRegister Today & This Ad Goes Away! Syndicated Advertisement
- Join Date
- Advertising world
10-13-2012 08:16 PM #2SoCal Satelital Loco!
Re: why does the openbox s9 scan in nbc and fox on 99w but microhd won't?
Hmm I scanned it fine with my S10 too but cant say about the Micro since I dont have one.
Sent from my SPH-D710 using TapatalkDTV Gear: (3) HR24-500 & Genie HR34 all with Ext HDDs
4:2:2 Gear: AZBox HD Elite Prof 7500 USB
FTA HD Gear X2 Premium HD - Openbox s9/s10 and some micro wave-hd
Dishes: 6FT C-BAND - 1.2m w/HH120 - Winegard 1m "fixed" - DTV Slimline w/SWM5
10-13-2012 08:29 PM #3
must be a firmware issue, I have 3 S9 and 2 S10 and none of them scan them in. Of course all of them have the same firmware version. Are you sure they're NBC and Fox in 1080i and 720p?? What date is your firmware??? ThanksProud to be a subscription-free household - FTA & OTA only
NSS 806 @ 40.5 W, Intelsat 14/ 805 @ 45/55.5W, Galaxy 19 @97 W C band, AMC 1 @ 103 W
Gal 16 @ 99W, Gal 17 @91W ,Hispasat 1C/D 30.0W
(1) Solomend, (2) S9, (1) S10, (1) RS1933, (1) CS8100HD
10-14-2012 05:29 AM #4
my firmware on the s9 is hdst 11-03-21. it is not one of the newest ones but i like it because the moving dish goes away when it sees signal and it doesn't lock up. charlie
10-14-2012 07:41 AM #5
Yes, I too have quickly scanned in the new NBC and FOX HD channels on 99W with my S9, but the MicroHD doesn't?
10-14-2012 07:59 AM #6