Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!
- JOIN US AS A MEMBER TO GET RID OF MANY OF THESE ADS INCLUDING THIS BIG AD BOX!!!
- This message (and many of these ads) will appear on every screen until you register! CLICK HERE to Register for FREE!
Coolsat 8100HD, Looking for help from Guru's
I have read several post about the CS8000/8100 looking to find anything that may help me w/out luck. I see many member here used to play around with them. I have a CS8100HD which I changed most of the Caps at the Power Supply board. So far the box is booting OK. If I connect the coax cable directly from the LNB to the box it works OK. It does scans everything OK and I can watch all the channels OK. Problem I'm having is when I try to connect more than one LNB using a switch. When I used a switch the box goes to NO signal. I have try using a diseqc 1.0 and 1.1 with same results. Even connecting the LNBs one at the time to different ports into the switch when I check there is no signal. I have tried Ku and C-band individually as well. If I go back and connect just one directly then it start working again. Does anyone have any idea where I can look and see if I can troubleshoot the problem??? Since most of the parts on the power supply board have being replaced I guess the problem will be on some of the components sorrounding the tuner. Thanks!!
Proud to be a subscription-free household - FTA & OTA only
Gal 16 @ 99W, AMC 1 @ 103W, Gal 3C @95W, Gal 23 @121W,
Satmex 8 116.8W, Hispasat 1C/D 30.0W, AMC 21 @125W
(2) X2 Premium HD, (2) Openbox S10, (1) Linkbox 8000HD Local
12-16-2012 06:24 PM