Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!
- JOIN US AS A MEMBER TO GET RID OF MANY OF THESE ADS INCLUDING THIS BIG AD BOX!!!
- This message (and many of these ads) will appear on every screen until you register! CLICK HERE to Register for FREE!
Very very very well explained. I understood it the first time I was reading it. Thank you for taking the time to post this.
So in my case it could be a low quality LNBF or a miss-tuned LNBF or a drifted LNBF because of temperature etc. etc. etc.
The PLL should be the closest to the transponder frequency since it is using a crystal for oscillation as a reference point.
In other words when I scanned with the old LNBF and the new LNBF, the frequency may not be the same. If the frequency difference is way greater than the receivers stored frequency,then the receiver can't handle this since it is out of specs and the channels do not tune in.
01-05-2013 08:20 PM
Exactly! Now with the PLL LNBF, the Blind Scan transponder frequencies will be as accurate as the receiver's firmware provides.
Originally Posted by johann12
Last edited by SatelliteAV; 01-05-2013 at 09:21 PM.
Brian's explanation above, of LNB LO Frequency has been permanently placed in the FAQ section.
FTA---> GEOSATpro microHD,HDVR1200, Amiko Nano HD, etc. 120" Unimesh for C-band only with Titanium Satellite C1-PLL > 55.5W to 131W, Titanium Satellite ASC-1 Controller.
-----------GEOSATpro 90cm and Titanium Satellite PLL-1KS on Stab HH-90 motor, GEOSATpro 1.2M and SL2PLL fixed at 125W.
DISH--> Dish America Silver Pack + Encore and Starz
ke4est @ SatelliteGuys.US If You Want To Stay Ahead Of The Rest, Please Click Here
----Always Here To Help!!
Originally Posted by ke4est
I am sure that will help other folks.
Tags for this Thread