Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!

        

Results 1 to 5 of 5

Thread: DMS 4x1 DiSEqC switch

  1. #1
    Join Date
    Mar 28th, 2010
    Location
    Some where in Puerto Rico
    Posts
    12
    Post Thanks / Like

    DMS 4x1 DiSEqC switch

    Hello guys, I recently add to my set up this switch because a friend bought it without knowing his receiver cannot handle DiSEqC 2.0 so I trade him my Chieta after I tested if the SkyBox S12 can work with the 2.0, it turns out my SkyBox works perfect with this switch I didn't have to do anything in the settings, now I read info about this switch and found the word Bi-directional now can someone explain me what it really does? what exactly this feature is going to help me? I did search with google and bing but to techy for me, I need simple English or example of this feature, Thanks in advance Turbo
    p.s. I might have more questions about this switch and cascade.

  2. # ADS
    Register Today & This Ad Goes Away! Syndicated Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

    Reigster at SatelliteGuys
     
  3. #2
    Help Keep SatelliteGuys For All, Click a Star and Become a Supporter! FaT Air did! Help Support The Site And Get Rid of the Syndicated Ads, FaT Air did! If you enjoy the site consider supporting it, FaT Air did! Be COOL like FaT Air and Click a Star and become a Supporting Pub Member today!
    Join Date
    Feb 27th, 2010
    Location
    97W 48N
    Posts
    4,291
    Post Thanks / Like
    Think it's to be compatible with some equipment that will answer back acknowledging that it switched or changed LO or whatever. I read something to this effect way long time ago. But I've never read of any equipment that actually does this. When this feature shows up in the FTA community is anyones guess. Must be some commercial stuff using it(???)
    One night I walked home very late and fell asleep in somebody's satellite dish.My dreams were showing up on TV's all over the world. -- Steven Wright
    Openbox S9, Pansat 3500SD, 139w to 55.5W +30W
    10Ft USS Steel BUD and an assortment of ChannelMaster dishes, (1)84e, (2).7m, (2)1.2m,(1)1.0M, (1)2.4m[8ft] offset in storage.

  4. #3
    Join Date
    Mar 28th, 2010
    Location
    Some where in Puerto Rico
    Posts
    12
    Post Thanks / Like
    Thread Starter
    Thanks my friend, another question, I bought 8x1 digiwave DiSEqC switch and I will be using the cascade thingy, this DMS 4x1 can be use for cascade? I read in this forum a review of the DMS 8x1 and it didn't not work like the Digiwave did, something about uncommitted, the digiwave proved it can do cascade I hope the 4x1 Dms can be connected to the 8x1 digiwave in cascade if not then I'll have to buy another 4x1, thanks Turbo

  5. #4
    Help Keep SatelliteGuys For All, Click a Star and Become a Supporter! Iceberg did! Help Support The Site And Get Rid of the Syndicated Ads, Iceberg did! If you enjoy the site consider supporting it, Iceberg did! Be COOL like Iceberg and Click a Star and become a Supporting Pub Member today!
    Join Date
    Nov 17th, 2003
    Location
    Parts Unknown
    Posts
    89,925
    Post Thanks / Like
    If its a digiwave yes you can.
    Here is an older review of it
    http://www.satelliteguys.us/threads/...omitted-switch
    FOLLOW THE BUZZARDS.....

  6. #5
    Join Date
    Jan 4th, 2013
    Location
    Minsk Belarus
    Posts
    71
    Post Thanks / Like
    TurboMazda
    I didn't have to do anything in the settings, now I read info about this switch and found the word Bi-directional now can someone explain me what it really does?
    Variants DiSEqC

    -DiSEqC 1.0 - it allows to be switched between 4 companions;
    -DiSEqC 1.1 - allows to switch more than 4 companions;
    -DiSEqC 1.2 - allows to make the control for position..;
    -DiSEqC 2.0 - the bilaterial mode of data exchange in DiSEqC 1.0 is added.

    Levels DiSEqC 1. Х assume unidirectional communication - only transfer of commands from a receiver to remote terminal units. Levels DiSEqC 2. Х provide transfer, both commands from a receiver to remote terminal units, and answers of these devices to a receiver. Besides, depending on a set of formed executed commands and, accordingly, a set of supported devices these levels share on three subtotals: DiSEqC Х.0, DiSEqC Х.1 and DiSEqC Х.2. Here often there is a mess. For example, it is possible to assume, that level DiSEqC 2.0 above level DiSEqC 1.1, and a receiver supporting DiSEqC 2.0, should work, for example, with switch DiSEqC 1.1. Actually, DiSEqC 2.0 is «the two-forked version» level DiSEqC 1.0, and includes only a set of commands of level 1.0.
    ------------------------------------------------------------------------------
    LNB will work and with DISEqC 4x1-1.0 or DiSEqC 4x1 - 2.0
    -----------------------------------------------------------
    Hello. It is necessary it will be defined, how many you think to establish Dish and LNB.
    If 4 LNB will go 1 DISEqC 4x1-1.0 or DiSEqC 4x1 - 2.0 report
    If 6, 8, 10 LNB will go DISEgC 6x1-1.1 and DISEgC 8x1-1.1 and DISEgC 10x1-1.1
    If it is more 8-16 LNB that below a photo and how to include. If the receiver supports report 1.1
    At me on 4 Dish it is included 16 LNB.И by the cascade has connected 1 DISEqC 4x1-1.1 plus 4 DISEqC 4x1-1.0. Perfectly all works.
    If at you is in a receiver 12V.То it is possible to connect 8 LNB through the relay 12V.
    There are at us on sale and switchboards DISEgC 16x1-1.1 and DISEgC 32x1-1.1- But they are expensive ---------------------------------------------------
    It is possible and 40 LNB the cascade to connect-report 1.1.Это switchboard DISEgC 10x1-1.1 plus of 10 pieces DISEqC 4x1-1.0 or DiSEqC 4x1 - 2.0
    -+ 64 LNB
    ---------------------------------------------------
    Click image for larger version. 

Name:	Дис-1.1.jpg 
Views:	37 
Size:	66.9 KB 
ID:	85044Click image for larger version. 

Name:	14e757a299393a15d76e72df093106c3.jpg 
Views:	32 
Size:	96.6 KB 
ID:	85045Click image for larger version. 

Name:	aaf176428019dce24fc9d218d574e230.jpg 
Views:	34 
Size:	36.5 KB 
ID:	85046Click image for larger version. 

Name:	DiSEqC_1-10.JPG 
Views:	33 
Size:	34.0 KB 
ID:	85047Click image for larger version. 

Name:	16х1-дисег.jpg 
Views:	38 
Size:	37.6 KB 
ID:	85048Click image for larger version. 

Name:	Дисег-16х1.jpg 
Views:	37 
Size:	61.9 KB 
ID:	85049Click image for larger version. 

Name:	Реле 12V.jpg 
Views:	38 
Size:	25.8 KB 
ID:	85050Click image for larger version. 

Name:	ac803c767cc6.jpg 
Views:	47 
Size:	12.8 KB 
ID:	85051Click image for larger version. 

Name:	0d5ad5f3afdb.jpg 
Views:	46 
Size:	24.3 KB 
ID:	85052Click image for larger version. 

Name:	22kusing.png 
Views:	36 
Size:	17.1 KB 
ID:	85053Click image for larger version. 

Name:	57f023cbe2db.jpg 
Views:	39 
Size:	46.0 KB 
ID:	85054Click image for larger version. 

Name:	Дис-1.1-16LNB.jpg 
Views:	39 
Size:	65.8 KB 
ID:	85055Click image for larger version. 

Name:	64 ЛНБ.jpg 
Views:	35 
Size:	44.4 KB 
ID:	85056Click image for larger version. 

Name:	Дис-+12v--8 ДТИ.jpg 
Views:	38 
Size:	39.9 KB 
ID:	85057Click image for larger version. 

Name:	дисег 4х1 1.1 каск.jpg 
Views:	36 
Size:	96.2 KB 
ID:	85058Click image for larger version. 

Name:	90bb5fa16156.jpg 
Views:	44 
Size:	26.7 KB 
ID:	85059Click image for larger version. 

Name:	сх.под 16х1 дисег.gif 
Views:	45 
Size:	11.6 KB 
ID:	85060

    Last edited by Borisov-54; 02-04-2013 at 01:31 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •