Welcome HOME to SatelliteGuys! We are America's Most Popular Satellite Forum!
Anolle's good points, plus it might be good to note-be sure you run the cable to the motor first, then from motor to lnbf. And that you have chosen the correct coax connections on the motor itself.
X2 Premium HD, 1m primestar DG380 motor.10'Sami+GI650 for c-band.
Backup ku system currently being updated.
Avatar: A little snow on the dishes...tired of looking at all the rain, haha.
my system consist of a receiver ( echolink EL - 5060 2ca usb ) an old goldvision universal lnb (freq : 10.70 -12.75) and a dish
i did get the lnb short message with alot of cables some of them are fairly new even when i just hooked the receiver to the motor so i know that the lnb have nothing to do with it ; but with one of the cables that i used, it did give me the short message but when i held it straight and pressed on it the problem was solved so i concluded that it is a cable problem
again i welcome all suggestions and tips thank you guys