Self install slimline 3 LNB SWM dish

[kdiver58]

All done .. Biggest thing was I had to brace my mast a bit I kept having one transponder on the 99 that would not stay above 90 .. Once I braced it up . I was able to tweak it .. The info off of
http://www.dishpointer.com/

Get rid of this ad below, as well as the link redirect by becoming a Supporting Pub Member

was spot on. I preset everything and mounted the dish on the mast rotated it until I got 101 to peak. locked it down on the mast. Then pointed a web cam at the TV. I put my netbook up on the roof and used it to watch the numbers on the DVR's meter and peaked 103 . Went down the ladder and into the house and switched the DVR's meter to 99 back up on the roof and peaked 99 .. That's when I found that I needed to brace the mast. Once I braced it everything stayed above 92 and I was DONE ..

[raoul5788]

---

ADVERTISING BOX

---

The Slimline dishes are supposed to use two monopoles. You may find you need to add another one at some point if your signal strengths don't hold up.