Results 1 to 9 of 9
- 12-26-2009 12:14 PM #1
SatelliteGuys Regular
- Join Date
- Nov 8th, 2009
- Location
- Honduras
- Posts
- 73
DMX741U to Channel Master 1.8 offset adaptor problem
ADVERTS 1
I recently bought the DMX741U along with the offset adaptor kit.. however, the LNB adaptor will not attach to my channel Master composite 1.8M dish.
The Channel Master Dish has it's universal LNB mount that the support arms attach to... the LNB mount is integral with the 3 arms that meet to this point, it does not have a rectangular mounting point as do others that the adaptor kit you sell is made for.
How can I get an adaptor for this antenna???
Or should I pull out the hack saw and super glue, and fit your adaptor on that way???
I was looking through these forums for info on LNB mounts by channel master and can't find what I am looking for.
Thanks in advance from any help I receive on this..HB
- 12-26-2009 12:14 PM # ADS
Register Today & This Ad Goes Away! Circuit advertisement- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
- 12-29-2009 10:25 AM #2
There are different modifications that people on this forum have made. I will see if I can find a picture of the modification and post it.
- 01-04-2010 12:01 AM #3
SatelliteGuys Regular
- Join Date
- Nov 8th, 2009
- Location
- Honduras
- Posts
- 73 Thread Starter
Modification photos if possible
Thanks Robbie, I will wait to see if you can round up a photo of the modification..
I have a pretty good idea how to do it, however, there are several ways I am looking at each placing the lnb in a different position, and I am very curious as to which modification will work.
thnaks for your quick reply, HB
- 01-09-2010 09:35 PM #4
Robby, any thoughts as to possibly developing a feed assembly/junction block for the DMX741U that would work for offset CM dishes?
- 01-11-2010 11:11 AM #5
I'm actually in the process of running some tests now & have been in touch with the engineers to develop it.
I have my hands wrapped around many new projects and new products, some of which you will see released soon. This one is also on the to do list.
This is the first place where I will post as soon as something new is developed so keep tuned
- 04-01-2010 09:16 PM #6
- 04-28-2010 01:46 AM #7
Not yet. I will release it here as soon as I have something firm.
- 12-23-2010 03:48 PM #8
Old thread, but was hoping there may be an update....any chance this adapter comes to fruition?
- 01-06-2011 06:53 PM #9
Robby, any update? A reply would be appreciated....thanks!

LinkBack URL
About LinkBacks
Bookmarks