DMX 741 setup questions

**Ironsides** · 03-24-2010 02:56 PM

Hi I am wondering if you could help with setup instructions for the DMX 741

Ok Setting up with Dreambox 7020, requires 3 settings for the Lnbf

LOF/L and LOF/H and threshold settings....

I thought LOF/L should be 5150

LOF/H I thought should be 5150

and threshold should have been 3200

However what happens is It will scan a satellite and lock a transponder but will not see the services.

This could be a software glitch but It doesn't happen on my Invacom Univeral Linear LNBf or my Fortec Univeral Linear Ku band lnbfs. Which cause me to think I am not inputting the correct settings for the DMX 741...Also on my regular C-Band LNB I had no problems using the above settings.

**WSInternational** · 03-24-2010 11:02 PM

The LO frequency for the Ku band should be set to 10750MHz or 10.75GHz.

**Ironsides** · 03-24-2010 11:24 PM

umm yes that is correct but I am asking about C-Band...

**Ironsides** · 03-26-2010 02:10 AM

After spending hours on this, I have just decided to use my Neusat along with the DMX741 as they seem to work very well together. I am very happy with my purchase so far. The Ku side works fair and I can't complain about that either...

Thanks

**valveton** · 09-10-2011 11:42 PM

Originally Posted by Ironsides

After spending hours on this, I have just decided to use my Neusat along with the DMX741 as they seem to work very well together. I am very happy with my purchase so far. The Ku side works fair and I can't complain about that either...

Thanks

I have a drembox 500s working ok, with the 3 LNB settings for C band in 5150,