WS1247M Arms support.

[a21tec]

Hello friends, I need your help with my new antenna WS1247M,
I asked to a friend to buy and send it for me from USA, and so after 2 months
I received here in Brazil but, the box was open and lost 2 parts, so I need to know some lengths
Please see the picture, any help will be very important to me.
I received the motorized kit number 5 from galaxy site(WS), dish 1,2m and SG 9120B motor and I need please to correct adjust for the best precision .
LNBF support arms left, right and Center lenght?
Please help me.
Thanks in advance.
A21tec.

[WSInternational]

WS International Model# WS1247M


These are approximates.

[a21tec]

Hello friends, using your help finally my antenna is working ok, next weekend I'll to install the rotor.
Without LNBFused a LED flashlight and the focus appears in the middle between the four screws on the dish.


I had problems with the antenna screws, they're soft, get lost very easily, also the motor bolts are not correct but I managed using 7mm bolts and nuts.
With the antenna without the rotor I get signal 80% in 89º, 63º, 15º satellites, but I had problems with the mast so I do to install a stronger, for now thanks for your help, soon take some pictures here.


Atual21.

[a21tec]

Hello everyone, I finally installed my kit number 5 of ws digital, and what I can say is that this antenna works perfect with this rotor, I have a sign larger than 70% in almost all satellites between 12.5º and 89º and I have until now 13 satellites tuned.
I've got another antenna 80cm with rotor and is very large difference between them and many TPs that I don't receive anything wth 80Cm with WS 1247M I have over 40% signal on it, and unbelievable, I'm very happy.


A21tec.
Brazil.

[WSInternational]

Congratulations! That looks great! What type of motor are you using with this dish? Can you share some more pictures with us and some more results of your signal quality?