Recent content by kelleyga

After trying with a cable from the LNB to a TV next to the Pole I get the same results. I have to 2 LNBs which can not switch from V to H or viceversa. I will order a new one just to be 100% sure. Thanks.

HI Guys, sorry for the confusion. I only use ONE receiver at the time. THis is what I just did pointed BUD to Intel 11 @ 43 degrees. Went up the latter and set the Square on the LNB to 9 pm. I get ONLY vertical TPs and I get them scanned as Vertical and Horizontal also, so I get the channels...

Power should not be the problem as when I move it around it works for Horizontal but NOT for Vertical. I will try 3 and 9 O'clock now, I will let you know.

I have: 12 feet BUD Fortec Ultra Mercury 2 Receiver Visat Receiver 2 DMS 621 LNB (Only C-Band) I am not new at installing dishes, but this one I dont know what I am doing wrong. When I Scan from either receiver or using any of the 2 receiver I only get Vertical TP. During the Blind...

Thanks.

I have a 12 feet BUD and several receivers. Can I get the locals FTA in any Satellite? Thanks

WOW,that sound DIFFICULT. Do you have a picture that I can see? To tell you the truth I did not understand how to even start doing what you are saying fixed the problem for you. Thanks.

I was setting this up in the receiver as a Universal LNB... maybe that is wrong. Now I am changing it to 5150 only. I will see. I also noticed even though I am able to find channels It is not finding all of them in Vertical. I get several with strong signal, but not finding all of other ones...

I just scanned Intelsat 14 and 11 (45 and 43 degrees). I got some channels, the strange thing is that it will List Vertical frequencies (when doing a blind scan) and then it tries Horizontal scanning and lists the exact same channels that it got vertically but now with H showing. This happens...

Right now I am next to the dish with a long cable. I will make a very small one, but it was working when I tested with the same cable long time ago. Model BSC421 DMS International. Nothing in the middle. I have a cable connected to the LNBF and from there straight to the receiver Guys, If I...

I only have 2 receivers but only one connected. What I meant to say was that either one only gets Vertical, so it is too hard to say that the 2 receivers are bad. This must be the LNBF. I will start turning it until I get one of the Horizontal and see. Thanks.

THIS BUD WAS WORKING, I JUST HAD TO REPLACE AN LNBF THAT WENT BAD. I got 2 receivers, a Fortec II Mercury and a Viewsat. 12 foot BUD ad a BSC421 LNBF. I have tried the 2 receivers I can only get Vertical channels. I was told the receiver is the one that sends the signal to the LNBF to make...

I wanted to come back to this and update: The problem was my LNBF. It was not switching and only getting H. I thought about that and then started manually turning the LNB and that was the problem. I got a new LNBF. Thanks all for you help.

I have a BUD (12 foot). I use one of those long motor arms. I am also using a VBox. It has been working fine but now when I want to move the motor up is does it really slow. When I want to move it down it works fine. For example if I move 10 point down, to go back those 10 point I may need...

Sorry, Yes, Intelsat Intelsat 11 @ 43 degrees (I am still in the old times)